Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Air Hose Repair Question

Posts

Air Hose Repair Question

#1

Air Hose Repair Question

Thomas Norton

>I am need of some new fittings on my air hose. I notice that the threaded ones have a "barb" end. When this is installed do I need to add a small hose clamp to this? I would think that would make it a bit bulky.

Re: Air Hose Repair Question

#2

Rick L

Re: Barbed fitting clamp reqired...

Rick L

>There are other types of self locking fittings. Go to www.mcmaster.com and see the other options.

Re: Air Hose Repair Question

#3

Re: Air Hose Repair Question

Larry in NW Ohio

>Tom If the fitting goes into the hose fairly tightly, you should not need anything to hold it in. I don`t use any clamps. Larry

Re: Air Hose Repair Question

#4

Re: Air Hose Repair Question

Fred Davis

>I have "quick release fitting I have had for at least 33 years and they do not require clamps.

They have ridges on the barrel of the fitting and are a really tight fit into the air hose and have a yellow plastic ring that the end of air hose expands into , or so I think.

Beyond that I would never have clamped hose fittings , because of the damage they can do to a freshly finished piece ,when it gets inadvertently dragged across it.

FredD