Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Pecan Triple Dresser *LINK*

Posts

Pecan Triple Dresser *LINK*

#1

Pecan Triple Dresser *LINK*

Fred Davis

>I had a client pick this Triple Dresser from Bill Hylton's book of Chests of Drawers.

Designed by Michael Seward , a devotee of Thomas Moser.

This is my rendition of that Chest done in solid Pecan with a Black Walnut base and drawer pulls.

Finish composed of Watco-Denis Medium Oil to bring out the grain and Vinyl sanding sealer under CAB Rubbed Effect Lacquer , finished off with a coat of Minwax Finishing wax , hand buffed.

Some things were added like dust panels between drawers , two pulls on each of the wide center bank of drawers instead of one, left off a incredibly flimsy trim that was applied around the edges of the top and bottom , thereby covering half of the dovetail carcase assembly joinery.

Pacific cloth lining for the top Jewelery drawers and that is about it.

All things said and done, a much better initial design then one I could have cooked up.

FredD


http://picasaweb.google.com/FredD17209/TripleDresser?feat=directlink

Re: Pecan Triple Dresser *LINK*

#2

Re: Pecan Triple Dresser

Clint Searl, at the base of Haycock Mtn

>Very nice work; I like those dovetails on the top edges.

Clint

Re: Pecan Triple Dresser *LINK*

#3

Re: Pecan Triple Dresser

mdclor

>Fred,

Looks great! Nicely done and a lucky client.

Merle

Re: Pecan Triple Dresser *LINK*

#4

JL

Really like the contrasts of the base and pulls

JL

>It adds a lot of dimension to the piece. Very nice chest.

Re: Pecan Triple Dresser *LINK*

#5

Ellis Walentine

Really nice, Fred

Ellis Walentine

>That pecan is understated and lovely. You did a nice job laying out the drawer fronts. A couple questions about your drawer bottoms... How thick was the plywood and what is your rationale about grain direction?

Ellis

Re: Pecan Triple Dresser *LINK*

#6

Re: Really nice, Fred

Larry in NW Ohio

>That is just a beautiful job you did, I wish I could do half as good. Larry

Re: Pecan Triple Dresser *LINK*

#7

True heirloom quality

Mike Farinella

>

Re: Pecan Triple Dresser *LINK*

#8

Re: Pecan Triple Dresser

Jim Dillon

>Fred,

Beautiful job and lovely wood choice. I would be proud to have that in my home. I've made handles like you made for a small three-bin storage cabinet and they have worked out very well. Thanks for posting such nice pictures; they loaded reasonably fast (well, nothing is ever fast) on my dial-up, so thanks for keeping the file size small.

Jim

Re: Pecan Triple Dresser *LINK*

#9

Absolutely beautiful!

Mike Caldwell

>

Re: Pecan Triple Dresser *LINK*

#10

Re: Really nice, Fred

Fred Davis

>Thank you all for the nice comments Ellis,

Concerning drawer bottom orientation, If I am doing a antique knockoff, I use solid wood and run the grain right angles to the drawer front.

I plane down the bottom to 3/8ths and bevel the edges to fit a 1/4" groove in the drawer side.

For the dresser the plywood is 1/4" , a thickness I and shops I trained in have always used in Kitchen cabinet drawers and because of the ply construction, the orientation of the grain is WYSIWYG and is not subjected to movement.

There was a thread not long ago about drawer side thickness and bottom material and I find that using a good hardwood 1/2" thick for drawer sides have never been a problem, nor has the 1/4" ply , keeping in mind the potential loading of it.

FredD

Re: Pecan Triple Dresser *LINK*

#11

Re: Really nice, Fred

Fred Davis

>"Concerning drawer bottom orientation, If I am doing a antique knockoff, I use solid wood and run the grain right angles to the front."

I meant to say the grain is run parallel to the drawer front, really bad thinking today.

FredD

Re: Pecan Triple Dresser *LINK*

#12

Re: Pecan Triple Dresser

George@Colonel's Workshop-Havertown PA

>Good Afternoon Fred,

Its a beautiful crteation and well documented photographically. You did a terrific job on the pecan.

George

Re: Pecan Triple Dresser *LINK*

#13

Re: Pecan Triple Dresser

Jim Shaver - Oakville, Ont

>Hey Fred,

Outstanding work, I really like it!

take care,

Jim

Re: Pecan Triple Dresser *LINK*

#15

question

Bill Tindall, E.TN

>I think the piece is exceptionally attractive. I particularly like the color.

The case appears to set into the base not, on it ? If so, what strategy did you use to get the perfect fit of case to base? Fit base to case, or fit case to base, other?

Re: Pecan Triple Dresser *LINK*

#16

Re: question

Fred Davis

>The case sest on the base, the designer had said it was not neccsary to fasten one to the other , though he had run a small trim piece along the bottom of the case.

I used Maple buttons I mak to connect the base to the case to allow for expansion.

I made the case first to make sure the base fit . ;-))

FredD

Re: Pecan Triple Dresser *LINK*

#17

Re: Pecan Triple Dresser

Hikmet C. Sakman -- Victoria, BC.,CDN

>Very nicely done Fred! I bet you're better at dovetails now, aren't you? ;-)

Hikmet Sakman aka Chico

Re: Pecan Triple Dresser *LINK*

#18

Questions......

Barry Irby

>Terrific piece, I really like it.

The back appears to be providing vertical or beam strength. If there any tendency for the center of the front to sag? My Engineering brain wants to know. A center leg in the front would hurt the appearance, but would add a lot of support.

Did you make the pulls also?

Approximately how wide is it?

Great Job. You should be proud.

Re: Pecan Triple Dresser *LINK*

#19

Re: Questions......

Fred Davis

>Barry,

this particular piece had horizontal dividers rather then normal vertical ones and the designer used a Frame and Panel back for support of the back side and the face frame is half lapped and attached to the horizontal dividers at the front and dovetailed into the case sides and top and bottom.

I departed from this slightly for the back , I used the Frame without panels and stepped it in a additional 1/4" to allow for the attaching of a 1/4" Meranti plywood back , after I had finished the case assembley and Lacquer finish.

I added dust panels which makes a nearly air tight fit of the drawers which have about 1/32" side play or less.

The length of the Chest is a fraction under six feet.

Regarding your concern about sag, the base rails are two and three quarters inch square , with massive M/T joints and I added two spreader rails to keep the base sides permanently parallel.

I suspect the case weight is evenly distributed along the length of the base.

The Pulls are faithful to his design, though I made them from Black Walnut as well as the base for contrast.

This thing is extremely heavy even without the drawers and will take four men Saturday to load and transport to clients house.

I am glad you like it , the client sure did ;-))

FredD

Re: Pecan Triple Dresser *LINK*

#20

Re: Pecan Triple Dresser

Fred Davis

>Chico,

I can't take all the credit for the dovetails , Dave Keller's jigs take a lot of the anxiety out of that job , though you still need to pay close attention.

FredD