maples box with 4 pix
Tom Sontag - St. Louis
>have always admired the grid paintings by Piet Mondrian. With them in mind, I made this box using a number of different samples of maple: curly, spalted (with and without ambrosia beetle stains), straight ambrosia, and burl.
I made veneers and laminated both sides of some 1/4" MDF. Then I assembled sized pieces with the katalox frame elements. Katalox is a Mexican timber that is hard and close grained with a tendency to tear out. There were [i]lots[/i] of glue-ups. To unify the colors a bit and deepen both woods I used garnet shellac for the finish. I am happy with how that part came out; the photos are not enhanced.
It is about the size of a larger cigar box. It is not attached to the katalox stand. I put a bead of silicon caulk on the stand to keep the box from slipping around.
Open:


Wooden hinges:

From the front the handle disappears into the design:




