Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

G&G Morris Chair Update...

Posts

G&G Morris Chair Update...

#1

G&G Morris Chair Update...

Jim Shaver - Oakville, Ont, Canada

>Well the woodwork is done

Photobucket

6 coats of tung oil...

Photobucket

Off to the upholster for final work on cushions.

Photobucket

Photobucket

Photobucket

Final pictures in a few weeks.

take care,

Jim

Re: G&G Morris Chair Update...

#3

OK Now how about the leather?

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>I am thinking something like some of that black and white cow with the hair left on. ha

You might as well have some more fun with this.

Re: G&G Morris Chair Update...

#4

Re: G&G Morris Chair Update...

Clint Searl, at the base of Haycock Mtn

>Looks great. Are the arms book matched?

Clint

Re: G&G Morris Chair Update...

#5

Re: G&G Morris Chair Update...

Jim Shaver - Oakville, Ont, Canada

>Hi Clint,

Yes the arms are book matched, the growth rings converge as well on the front of the arms, the curl flows away from the front like a bow wake on water.

Take care,

Jim

Re: G&G Morris Chair Update...

#6

Re: OK Now how about the leather?

Jim Shaver - Oakville, Ont, Canada

>Moooo!!!!

LOL,

Thinking tapestry actually...

:-)

Not "Pastry" George!!

Take care,

Jim

Re: G&G Morris Chair Update...

#7

Re: G&G Morris Chair Update...

Clint Searl, at the base of Haycock Mtn

>Outstanding! Your design is a fresh turn on the A&C genre. Now, how about spring down cushions in a burgundy faux crocodile leather from Edelman.

Clint

Re: G&G Morris Chair Update...

#8

Re: G&G Morris Chair Update...

Jerry Gibbs

>noticed the back slats are not curved. I think curved back slats are a waste of time. Jerry Gibbs

Re: G&G Morris Chair Update...

#9

Re: G&G Morris Chair Update...

mike from american sycamore

>I will have to disagree kindly...the curved back sets so much better, is traditional, and shows that the crafts person took the time to do it right! IMHO

Re: G&G Morris Chair Update...

#10

Doing it right?

Jim Shaver - Oakville, Ont, Canada

>Hi Mike,

I guess I am not sure what you mean by "doing it right". This is my third Morris chair and I have made backs with both curves and flat backs, I prefer flat backs for comfort. What ever "doing it right" means is a matter of choice, this is right for my choice.

Jim

Re: G&G Morris Chair Update...

#11

Re: Doing it right?

Bruce, a MN Galoot

>I made a plain old morris chair a bunch of years ago and went with the curved slats. I'm not convinced they add to the comfort of my chair and the next one I make (at my daughter's request) will have straight slats. To each his own, I guess, but my own is straight slats.

Let me say, Jim, that I do like what you've done with the chair. I like the style, of course, but it's those extra features you've added that really set it off. I'm not a purist in any way, and let's just say that your chair just "does it" for me.

Very nice job, and great wood. That curl is fabulous.

Bruce

Re: G&G Morris Chair Update...

#12

Corinthian leather

Andy Halterman: No play time

>I hear that stuff is the shizzle.

Awesome work as usual.

Andy Halterman

Ready for the annual roman candle dueling session in Hendersonville, NC�

Re: G&G Morris Chair Update...

#13

Re: Doing it right?

mike from american sycamore

>I have made and help students make over a 100 Morris chairs. It is one of my most requested classes and I still have to disagree kindly that straight backs set as comfortably as a curved back, IMHO building a straight back is a short cut and takes away from the appearance and how the chair sets. The only reason to build a straight back is it is easier, quicker, and requires less material. to each is own.

mike

Re: G&G Morris Chair Update...

#14

Presumptuous

Clint Searl, at the base of Haycock Mtn

>

Re: G&G Morris Chair Update...

#15

Pronounced Cor-r-r-r-r-r-in-the-on

Mark Mandell - Gone Round In Jersey

>Since Ricardo's gone, I figured I'd throw that in.

[Remembering the Cordoba in New Jersey]

Re: G&G Morris Chair Update...

#16

Stickley

Mark Mandell - Gone Round In Jersey

>interestingly enough, I've seen both curved and straight backs in their dealer stores. I did a "Lady Morris" in cherry, and used a straight-slat back. Quite comfortable.

Of course, if one is teaching curve-cutting and/or bentwood construction, it makes sense to have students master those skills.

Re: G&G Morris Chair Update...

#17

Re: Stickley

Jim Shaver - Oakville, Ont, Canada

>Hi Mark,

I also agree, if you are teaching bent wood lamination construction it is a great application to work on your skills. My experience with bending wood this way is once you have the basics down and a little experience with it the process is simple and not complicated.

I have seen many pictures and drawings of Stickley chairs, I truthfully have not seen one with bent slats from the time period of the originals. I have looked through many catalogues as well and the only curved back I have seen was the one Norm Abrams made on NYW. I maybe wrong, but I think that the flat backs are the most common. I do know that as time has progressed that some aspects of the originals have changed and curved slates have become known. To call one proper over the other to me is a personal interpretation of design, but choosing flat over curved does not constitute being right or wrong.

This chair I am making is for a lady, it will have a 5 inch thick cushion on it, the chair design as per the PWW reproduction by Chris Schwarz was flat and is true to the original as well.

Take care,

Jim

Re: G&G Morris Chair Update...

#18

My Lady's Morris

Mark Mandell - Gone Round In Jersey

>Made for SWMBO.

She insisted on the "ankle stool" after I researched the piece. The stool was low and so named to allow the "proper lady" to "elevate" her feet in the presence of "gentlemen" yet maintain "proper coverage" of all but her shoes and a "slight bit" of ankle.


img

Re: G&G Morris Chair Update...

#19

Re: My Lady's Morris

Jim Shaver - Oakville, Ont, Canada

>Love the Chair Mark!

The cherry looks rich and the classic lines of the chair are crisp. The foot stool is excellent, I had wondered about the low stools before and had found the same interpretations of the reasons for them being low. I bet it's a project that brings back many good memories Mark, Thanks for posting it!

Take care,

Jim

Re: G&G Morris Chair Update...

#20

Side Story

Mark Mandell - Gone Round In Jersey

>Several months after it was done, the owner draws my attention to the arms which then display cracks and defects in the finish. Turns out my shellac coat was too old to use under the waterborne lacquer.

Only the arms were affected, so I sanded them back to bare wood and refinished (Watco + dark garnet + USL). I did, however, forget to ease the inside edge of the arms before refinishing. The result might have been an uncomfortably sharp edge, however, that crispness seems to attract people who sit in the chair. It doesn't seem take long before they are absently running their thumbs along that crisp edge like a set of worry-beads or something. Interesting tactile reaction.

Re: G&G Morris Chair Update...

#21

Re: Doing it right?

Brent Smith in Montreal

>"The only reason to build a straight back is it is easier, quicker, and requires less material"

I'm just going to add a couple of other reasons for going the straight back route;

1) Because the person building it, and presumably using it, finds the straight back more comfortable.

2) Because the person building it has decided that he/she wanted to add their own design aspects (call it flair)to the piece, as opposed to making an 'authentic reproduction'.

3) because the person building it decided they prefer the look of a straight back and decided that there was no law against it.

Re: G&G Morris Chair Update...

#22

Jason Roehl in Lafayette, IN

I hate to burst your bubble, Mark...

Jason Roehl in Lafayette, IN

>...but I'll bet people touching that crisp edge is like when one chips a tooth--they just can't keep their tongue off it. ;^) Kind of a morbid curiosity--they're wondering, "Why is this edge so sharp unlike the others?"

Looks good from here.

Jason

Re: G&G Morris Chair Update...

#23

No Bubble, Jason

Mark Mandell - Gone Round In Jersey

>I said like a "set of worry beads" so maybe they're unconsciously trying to find the splinter that's not there.

I'm not redoing the chair (again) to correct it, but it is a strange effect.

Re: G&G Morris Chair Update...

#24

Jason Roehl in Lafayette, IN

Gotcha...

Jason Roehl in Lafayette, IN

>I'm not into worry beads, but I have chipped a couple teeth (thankfully not to the point of necessitating repair--my wife has the expensive mouth in our family).

Jason

Re: G&G Morris Chair Update...

#25

Hey Mark--I like

Joanne in Point Pleasant, PA

>the Stickley Total Gym in the background! :-)

Nice chair and footstool! Perhaps not as fancy as the one above by Mr. Cloudlift Shaver, but a lovely version, just the same.