Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

workbench top

Posts

workbench top

#1

workbench top

Larry in NW Ohio

>As some of you know I`m going to get a new Silestone top on our kitchen cabinents. I asked about the old one and they said that they didn`t want it , so of course I thought it MIGHT make a top for my workbench. Yes I do know it`s very brittle. But I thought as long as I don`t beat it to death with a Big hammer. It`s a piece 3`X 7` so it would make a nice top if I can keep it from breaking, also it is heavy as an elephant. So comments, can I get away with it? Larry

Re: workbench top

#2

Re: workbench top

Ed Mulligan

>It would make a nifty, dead flat, assembly table top for gluing up case pieces and so on. With a coat of paste wax I think glue drops would pop right off.

I've seen granite set-up tables in patternmaker shops. This would be along those lines.

Re: workbench top

#3

Re: workbench top

Glenn Madsen near San Francisco

>I'd back it with two layers of glued 3/4" cabinet ply, or mdf. The less flex, the better, I'd think...

Re: workbench top

#4

Re: workbench top

Bill White

>Silestone, as you may know, is a man made quartz-based product. Not machine shop quality flat, but good enough for country music (little local humor). It is not porous, and will serve well as a work top. A little wax now and then will keep it lookin' good.

Don't beat on it.

Make sure that the bench design incorporates plenty of cross bracing for lateral and longitudinal support.

Bill