Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Semi-OT: looking for a really quiet small shop vac

Posts

Semi-OT: looking for a really quiet small shop vac

#1

Semi-OT: looking for a really quiet small shop vac

Mark Goodall - ATL - tooljunkie

>I'm looking for a vacuum cleaner that I can use for cleaning electronic equipment.... the dust collected on the fan intakes of network servers' etc. I need it very infrequently, but when I need it, I need it. Due to allergies, I can't blow the dust away, and these small vacs made especially for electronic equipment are simply worthless.

My requirements are:

- Small/portable

- Very quiet

- Good filtration (HEPA?)

It needs to be small enough to store in the car, and bring out quickly and inconspiquously. It needs to be quiet, so it doesn't disrupt customers in the event the equipment is close to staff. And it needs to have good filtration, since having allergy induced sickness for 2-3 days afterwards is no longer an option.

Price is pretty much no object.... I think. I'm guessing such a beast exists under $300, but an not willing to spend $1200 on one... well maybe. I can loose more than $1200 if I'm sick for a couple of days due to dust poisoning... yes, I'm calling it poison now.

I have used a 2.5 gallon ShopVac, but it's still a little big, terribly noisy and lousy filtration.

I'm thinking that the woodworking community might be the right place to find such a vacuum. I was thinking of the Fein TurboVac I or II (whichever is smaller), but fear it's still a little too big, but the sound volume and filtration seem to be exactly what I need. Alas, there's nowhere I can see one in real life.

Black&Decker DustVac type vacuums are better sized, but battery powered vacuums just don't have the power needed, plus I want something with a small hose.

I'm open to just about an mini-sized canister-type vaccum that meets teh criteria. I've seen a DeWalt 18V that looks like it might be the right size, but I don't trust battery power for these things, so a corded version might be better. Perhaps a Bosch, DeWalt, Milwaukee mini shopvac would work, but I'm havign trouble finding them.

I might just head over to the local Sears/K-mart, Kohl's, Walmart and look at small house vacuums, but keep thinking the Fein or somehting similar but smaller would work.

Any ideas would be appreciated.

Happy Woodworking!

Re: Semi-OT: looking for a really quiet small shop vac

#2

Re: Semi-OT: looking for a really quiet small shop

Bill Earl

>I bought one of the larger Festool vacs for the shop and was so impressed that I bought a CT-Mini for the office & lab too. It is very quiet, powerful and has excellent filters. The variable speed allows for even quieter operation when needed.

It's a 2.6 gallon, so it's probably not any smaller than your ShopVac, but it has a carry handle and a nest to coil the hose right on top.

Re: Semi-OT: looking for a really quiet small shop vac

#3

push broom

Frank in Forest Hill

>

Re: Semi-OT: looking for a really quiet small shop vac

#4

Re: Semi-OT: looking for a really quiet small shop

Nick Tuzzolino

>One of my vacs is the mini-Fein Turbo. A super sucker and the quietest of all others I've had.

Re: Semi-OT: looking for a really quiet small shop vac

#5

Here's one that is really quiet & energy efficient

Lee Schierer - McKean, PA

>Here's a shop vac for you Mark ;)


img

Re: Semi-OT: looking for a really quiet small shop vac

#6

That Was The Last Straw

George@Colonel's Workshop-Havertown PA

>Good Afternoon Lee,

I'm swept away!

George

(Over to you, Joanne)

Re: Semi-OT: looking for a really quiet small shop vac

#7

That was fairly corny, Colonel

Bill Houghton, Sebastopol, CA

>(and, yes, that was a pun).

Re: Semi-OT: looking for a really quiet small shop vac

#8

Re: Semi-OT: looking for a really quiet small shop

David's Workshop

>Google 3M 497. It's not that quiet,but it meets all your other requirements.

Re: Semi-OT: looking for a really quiet small shop vac

#9

Hey, that's my ex wife's car!

Neal in San Jose

>

Re: Semi-OT: looking for a really quiet small shop vac

#10

No, guys, that won't do. Too loud--

Joanne in Point Pleasant, PA

>it makes that loud car noise you all seem to like in other places. You know, "B'room! B'room! B'room!"

Re: Semi-OT: looking for a really quiet small shop vac

#11

Re: Service Tech vac

Kneale Brownson..Awaiting return to CO snows

>I've had a couple different service guys clean out big printers or copiers with a vac that came in a small suitcase. It had hoses and various accessory attachments. Wasn't quiet, though.

As a one-time motel owner, I had a fair amount of contact with the vacuum cleaner market, and more than one shop owner told me the manufacturers specify a loud motor because nobody believes a quiet one will do the job properly.

Re: Semi-OT: looking for a really quiet small shop vac

#12

Ellis Walentine

Ding ding ding

Ellis Walentine

>We have a winner. Nice one, Joanne.

Re: Semi-OT: looking for a really quiet small shop vac

#13

Alan Young

Must be sweeps month on WC

Alan Young

>

Re: Semi-OT: looking for a really quiet small shop vac

#14

This thread sucks! ;-)

mdclor

>

Re: Semi-OT: looking for a really quiet small shop vac

#15

Lee Gordon

Anothre vote for the Fein

Lee Gordon

>I have a Fein Mini Turbo and it would be just what you're looking for -- IF they still made it. They don't, but its replacement, the Turbo I, is about the same size but with a few additional features (such as the ability to be automatically controlled by the toll it's connected to). Costs around $300.

Re: Semi-OT: looking for a really quiet small shop vac

#16

Not just hot air *LINK*

Joanne in Point Pleasant, PA

>Hey, how about an Oreck? I know they are powerful little vacs. Not sure how noisy they are, but if you have an Oreck dealer around, check them out. They have small units, like this one, that even look as if they have a hepa filter.

http://www.oreck.com/canister-vacuum-cleaners/little-hero.cfm


Oreck Little Hero

Re: Semi-OT: looking for a really quiet small shop vac

#17

And please post what you get

Joanne in Point Pleasant, PA

>I have the same problem at work. You're right--those little black cannister "computer vacs" are useless.

Re: Semi-OT: looking for a really quiet small shop vac

#18

Re: Semi-OT: looking for a really quiet small shop

Barry Irby

>Mark, you could buy a small powerful vac and shut it up in a case. Fit the case with sound proofing and an inlet and some muffled outlets. You could even wire in an outlet and a cord and switch so that the vac stayed in the case and you plugged in the exterior cord and switch it on. This might reduce the noise to very low levels. It might make the vac over heat, but you won't be operating for long at any one time.

Re: Semi-OT: looking for a really quiet small shop vac

#19

Re: Semi-OT: looking for a really quiet small shop

Jay Lombardo

>Mark, I have a 3M 497 that is designed to do what you want. Although not as quiet as you may need, it is very powerful and has excellent HEPA filtering. It was designed for cleaning the toner and dust from laser printers, and all sorts of electronic devices. I got it from an old service tech who was retiring and I thought it would come in handy. The truth is, it has sat in the shop for 6 years and never gets used. If you would like it I would be happy to send it to you. Being a bit of a tool junkie myself I can't stand good tools going to waste not being used. Contact me by e-mail if you would like to give it a try.

Jay

Re: Semi-OT: looking for a really quiet small shop vac

#20

WOW..

David Hammelef

>Just looked that thing up... IT AIN'T CHEAP.

Re: Semi-OT: looking for a really quiet small shop vac

#21

OT: Found small shop vac *LINK*

Mark Goodall - ATL - tooljunkie

>Special thanks to everyone here with the good advice and offers. I want to post a followup to let you know what I found.

After looking further for a small portable shop vac, I found several. I was initially interested in a Fein, since I heard such good things about it, but continued to worry about the size. I looked for something else online, at woodworking stores, Home Depot, Lowes, Sears, as well as home/electronic stores.

One that caught my eye at BestBuy was a small portable Hoover canister HEPA vacuum from their new Platimum series. ( http://www.hoover.com/product.aspx?model=UH30010COM&ds=true )but it is only available as an extra bonus item when you buy the full upright model at $400.

I finally found one by accident while buying some Armor-All at Target. It's a Bissell Auto-Mate corded vacuum ( http://www.bissell.com/Products/c/Hand+Vacuums/p/automate/product.aspx ). It has a HEPA filter, a power cord (not battery powered) and is a little bigger than a dust-buster sized hand vac. It's not the quietest, perhaps somewhere in between a noisy shopvac and a quiet Fein. For now it seems to fit what I need well, and it was only $34 on sale at Target. I've used it once and it did exactly what I needed, so for now this is it. The replacement HEPA filter is $17, but I'll worry about that later (just as I suspect the company expects me to).

Happy Woodworking!


http://www.bissell.com/Products/c/Hand+Vacuums/p/a

Re: Semi-OT: looking for a really quiet small shop vac

#22

Also for pets

Mark Goodall - ATL - tooljunkie

>Forgot to mention something. This particular portable vacuum is marketted as an automotive vacuum.... that's why it was in the car aisle, along with the Armor-All and other car car products.

It seems like it's the same vacuum that is marketted as a pet hair vacuum which looks the same except for the pink logo/writing on it. I would assume that the HEPA filter, made to help people allergic to pet hair, would be good for my dust allergies.

Happy Woodworking!