Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

boat building------WebKitFormBoundarycmoubYZrG+z7B

Posts

boat building------WebKitFormBoundarycmoubYZrG+z7B

#1

boat building------WebKitFormBoundarycmoubYZrG+z7B

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>What are the preferred woods for making a small boat? Somebody told me oak, but I didn't think it bent particularly well.

------WebKitFormBoundarycmoubYZrG+z7BH64

Re: boat building------WebKitFormBoundarycmoubYZrG+z7B

#2

Re: boat building------WebKitFormBoundarycmoubYZrG

Grant in Iowa

>If you are talking about a strip canoe, or kayak, with an Epoxy Resin/ Fiberglas shell, then it need only be lightweight and pretty as the wood will be encased in a resin and varnish coating. Cedar comes to mind as the most common choice, although I have seen boats made of several species for appearance reasons.

If you want to make something that isn't fiberglassed, then White Oak is a good weather resistant material.

Tell us more about what you want to to and we'll try to be more specific.

Regards,

Grant in Iowa

Re: boat building------WebKitFormBoundarycmoubYZrG+z7B

#3

Re: boat building------WebKitFormBoundarycmoubYZrG

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>Actually, I'm not building a boat -- it's my great niece's husband. He wants to build a boat about 21 feet long with( I think) an eleven foot beam, and he mentioned oak as the best material with mahogany being next best. I couldn't advise him because I don't know anything about it, but I just have a feeling that oak doesn't bend well. So I thought I would look into it more for him. Any thoughts would be appreciated. I don't believe he has in mind fiberglass. He appears to favor a classic way of doing things with wood.

------WebKitFormBoundarygiAezBQIHv+g+Ekf

Re: boat building------WebKitFormBoundarycmoubYZrG+z7B

#4

Re: boat building

Robin Corell in Atascadero CA

>It really depends on what type of boat and the method of construction. there is a wide variety of woods that have been used in boat building. Some woods are chosen for being localy availble and others for being the best for the job. Many boats are built like a widsor chair, ie the most suitable species of wood is used for each part. it is common for the fames and keel to be made out of one wood and the planking to be another sawn frames from a species of wood with crooks or natural knees and bent frames out of a wood that bends well.

air dried wood is genneraly used exclusively in traditional wooden boats because of the need to bend. as for oak, it is usualy white oak that is used because it has thylosis and is very rot resistent and it bends well.

Some other woods that have been used are elm, ash, cypress, locust, hornbeam, and even cedar pine and douglas fir have beed used. Then you can start tossing in woods from other countries like mahogany, jarrah, blue gum, teak, and purple heart. Kind of like asking what is the best wood to make a table out of

Re: boat building------WebKitFormBoundarycmoubYZrG+z7B

#5

Re: boat building *LINK*

Don Orr

>We used exclusively white oak in the Onrust and there are some very extreme bends and twists. Bent by heating green wood with fire not steam (internal steam ?).


The Onrust