Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

DC pole

Posts

DC pole

#1

DC pole

Larry in NW Ohio

>I just wanted to thank everyone who post on my DC ducting pole on Thursday, if anyone wants to chime in yet, you can post here. It looks as if people like the PVC better, but that doesn`t mean it is better, just that it`s better for the ones that have it, at least that is what I take away from the pole. But the main thing is that whatever you have works for you and YOU LIKE IT. Be safe. Please never forget. Larry

Re: DC pole

#2

Re: DC pole

Barry Irby

>Larry, I posted on your pole and I agree with you. I worked with PCV because it was cheaper. It was a little more like wood and could be cut with wood working tools and thus seemed more "friendly" to me. If I had serious bucks to dispose of without pinching the pennies, I might have hired some one to install a really nice system and used a metal duct system designed by Oneida and one of their cyclones. Of course, if I had the discretionary bucks, I would have a much bigger shop and much better/more expensive tools. OTOH, I have a small shop and the same tools I have accumulated over the last forty years and I take a certain amount of pleasure out of having made a very adequate dust collector system out of very little money and the tools I already had. In some respects I wish I had read a little further into Bill Pentz'z site and found out about bending the pvc and making your own fittings. There is apart of me that would rather have a wye I made myself in only three hours rather than one I bought from Lowes for $5.95. $2 an hour is fine if you can just avoid setting yourself and the shop on fire with the heat gun.

Re: DC pole

#3

Poll

Clint Searl, at the base of Haycock Mtn

>

Re: DC pole

#4

Re: Poll

Larry in NW Ohio

>Thanks Clint- I was never very good at spellen. Larry