Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Taking a poll on DC

Posts

Re: Taking a poll on DC

#26

Re: Taking a poll on DC/more or the rest

Fred Davis

>http://picasaweb.google.com/FredD17209/DuctWork?authkey=Gv1sRgCKvyoYPTxeznNg&feat=directlink

Re: Taking a poll on DC

#27

ABS Drain Pipe

Robby Wright in San Marcos, CA

>The black stuff. I used it because the black color comes from carbon added to the mix. The carbon helps bleed off the static charge. ABS costs about the same as the PVC here and works about the same.

Robby Wright

Re: Taking a poll on DC

#28

Re: Taking a poll on DC *LINK*

Thomas S Stockton

>Fred

That's spiral pipe and it is fairly expensive. Snap lock pipe is what is used in HVAC systems sometimes and is split down the length and snapped together. The only problem with buying locally is that the sweeps are usually tighter on bends than what dust collector suppliers sell. The link will take you to a picture of snap lock.

Tom


http://store.oneida-air.com/4diax48long24gapipe.aspx

Re: Taking a poll on DC

#29

Re: Taking a poll on DC

Fred Davis

>Last try, I wasn't talking about duct pipe, I was agreeing with you about the superiority of aluminum duct tape and only caulking the rivet heads at the blast gates.

Standard 26 Ga. galvanized heat run piping was never intended for the negative pressure exerted on it by a cyclone, but if it hasn't collapsed , you may be on to something.

For the same thing in AC and heat runs in Aluminum, you would really be at risk for a collapsed pipe.

FredD

Re: Taking a poll on DC

#30

Re: Taking a poll on DC

Thomas S Stockton

>Onieda says 26 gauge is fine for 2hp and they say to go to 24 at some at some point above that.

Tom

Re: Taking a poll on DC

#31

Re: Taking a poll on DC

Fred Davis

>Onieda would know , now if you can solve the problems I have with a Delta D-J 20 eight inch jointer ................

FredD

Re: Taking a poll on DC

#32

Re: Taking a poll on DC

Michael Wangler

>Larry,

I use neither. When I was building my house I had a bunch of the cardboard carpet roles in the house. I need some piping needs for my Jet 1200 and it is still in use 8 years later.

Michael

Re: Taking a poll on DC

#33

PVC

David G. Sparks

>