Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

"Go to" tools

Posts

"Go to" tools

#1

"Go to" tools

Thomas Skaggs, Foothills of Mount Level

>I predict I am not alone about this....

I have two Festool Rotex sanders. A 5" and a 6". Both are excellent tools. I have had them both for a couple of years and I do use them. But which RO sander do I use the most? An old $59 5" DeWalt sander. Why? I dunno. Mostly because it's easier for me to grip in a way that is comfortable to me to use. It's not because the Dewalt is a superior sander, it's not. It's a pretty typical $59 sander. But I do get decent results with it. Funny how tool quality/price does not always guide our choices for use in practice.

I guess it's kind of like having a great pair of Italian loafers in the closet but always reaching for the worn out sneakers instead.

Tom

Re: "Go to" tools

#2

Re: "Go to" tools

George@Colonel's Workshop-Havertown PA

>Good Afternoon Tommy,

My P+C 333 ROS is like that. I'd also druther use my Father's Dunlop 1/2" chisel and his Craftsman 12" square.

George

Re: "Go to" tools

#3

Two examples

Clint Searl, at the base of Haycock Mtn

>I have a Starrett sliding square about ten years old and a Craftsman slider about 35 years old. I rarely reach for the Starrett.

I also have a pair of Stanley low angle block planes (with Hock blades) as old as the Craftsman square that I generally reach for instead of their L-N cousins.

Clint

Re: "Go to" tools

#4

Re: Two examples

Jesse Cloud

>Festool is my go-to sander, but I got a very pleasant surprise on a cheap lithium driver. Though I promised myself never to buy another Skil product, they had this little guy in a nice carrying case at Costco for less than $20. To my surprise, it feels great in the hand, reaches into tiny spaces, and runs forever on a quick charge. So, its my favorite tool now. Number two is that old beat up screwdriver I use to pry, poke, etc with.

Re: "Go to" tools

#5

Re: "Go to" tools

Larry in NW Ohio

>I just got a new PC390k ROS and it is with out a doubt that is going to be the sander I`m going to reach for all the time. That thing cut wood better than a beaver. Larry

Re: "Go to" tools

#6

Dale Lenz

Re: Where's David

Dale Lenz

>David has almost talked me into a Festool sander, from his past post. My 59 dollars RO DeWalt is my work-horse sander of the shop but I do like faster better if I can afford them.

Re: "Go to" tools

#7

Re: "Go to" tools

David Yoho

>As far as sanders go, I have an older PC 5" ROS (right angle style), two palm sanders - PC and Makita, and two Festool ROS - 6" Rotex and 6" 150/3. Of them all, I always reach for the Festool 150/3 first because it's a great finishing sander. If I need heavier stock removal, the Rotex gets the nod. The other three sanders are pretty much in retirement since getting the Festools.

My other go-to tool is one of my two Stanley #80 cabinet scrapers.

David

Re: "Go to" tools

#8

Dale Lenz

Re: Thanks, David

Dale Lenz

>

Re: "Go to" tools

#9

Re: "Go to" tools

Bob Entwisle in NJ

>Without a doubt it is my Snap-on ratcheting screwdriver, SSDMR4B.

It is the most versatile tool I have of the bazillion tools around here. I have only one of them, and I ALLWAYS KNOW WHERE IT IS, which is more than I can say about any other tool in the shop. It just feels good in my hands. If there is the possibility that a screwdriver is the tool for the job, then this one is the one I grab first.

I have an old-ish plastic handled 5/8� "Great Neck Wood Chisel Made in USA", that I use for everything that I can. It sharpens up nice has a real good durable edge.

I have lots of other choices with much 'higher pedigrees' but those two are my favorites.

For a ROS sander, I'm with the Colonel, it my PC333 VS,

Re: "Go to" tools

#10

Alternate view

wilbur

>"Funny how tool quality/price does not always guide our choices for use in practice."

Thomas, I'd say that tool quality completely guided your choice of preferring to use your DeWalt sander over your Festool. It doesn't matter how well a Festool sander sands, either from a finish quality or a stock removal standpoint, if you don't feel comfortabe holding it. How a tool fits in your hand certainly is a quality measure, although it's one that will be highly individualized and will not be the same for everyone.

I once had a chance to try out some hand tool activities on Adam Cherubini's workbench at a woodworking conference. His bench was impeccably built, but I preferred my set up of a thick poplar beam sitting on a pair of sawhorses. Why? Because Adam is well over 6' tall, and I'm 5'6". I just was not comfortable working on that particular bench, even though by every other measure it was clearly of higher quality than mine.

Re: "Go to" tools

#11

Clarification

Thomas Skaggs, Foothills of Mount Level

>Dale,

Just to clarify, my Rotex sanders are great tools and do excellent work. I highly recommend them. My only point was that whether it's a sander or a hammer there always seems to be some old stand-by that we reach for even if we have grander tools in our shops. I had that revelation the other night as I was sanding with my DeWalt and glanced a few feet away and saw my Rotex sitting there.

Buy the Festool!!

Tom

Re: "Go to" tools

#12

Re: Clarification

Larry in NW Ohio

>Tom Does that Rotex have a web site? Larry

Re: "Go to" tools

#13

Dale Lenz

Re: Clarification *LINK*

Dale Lenz

>Larry,

Below is a review of the sander. I'm not thrilled of having a sander that takes two hands to control.


Review