Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

connecting a bosch 3237 to a fein turbo II

Posts

connecting a bosch 3237 to a fein turbo II

#1

connecting a bosch 3237 to a fein turbo II

andre mallegol

>I am trying to connect a Bosch 3727 sander (discharge od 28mm) to a Fein Turbo II (inlet od 35mm). Tried Woodworker Supply, Rockler as well as Bosch and Fein, no luck. Anyone done this? Thanks for your help.

Re: connecting a bosch 3237 to a fein turbo II

#2

Re: connecting a bosch 3237 to a fein turbo II

Grant in Iowa

>The Fein regional rep gave me a semi-trasparent silicone sleeve that goes inside the end of the tube on the Fein, and over the outlet on the sander. It is a bit tricky to get in place the first time, but works great as an adapter. It even stays "stuck" in the end of the vac hose when I do regular cleanup with it.

In my case, this adapted the Fein vac to my PC sander.

THis is NOT the black/gray multi step adapter that is often bundled with the Fein accessories.

She gave it to me for free when I bought my vacuum at a local tool supplier demo days sale.

I vaguely recall her saying that it wasn't a commonly marketed accessory, but that she had a bunch of them that she gave away to new owners, since many of the new sanders require this to connect properly.

I looked online and didn't see it anywhere just now. It is a semi-clear tube of what appears to be silicone and is about 1 1/4" long.

Good luck in your search,

Grant in Iowa

Re: connecting a bosch 3237 to a fein turbo II

#3

Re: connecting a bosch 3237 to a fein turbo II

Larry in NW Ohio

>This is really a pet pee for me. Can`t the tool manufacturers get together and make htese vac hoses and outlets on sanders other dust making machines the same. They all seem to be just a little under or just alittle over one or the other. I think it`s just plain stupid. There isn`t any reason why they can`t be the same. Larry

Re: connecting a bosch 3237 to a fein turbo II

#4

Re: connecting a bosch 3237 to a fein turbo II

andre mallegol

>Thanks Grant, I hope I can find a Fein regional rep.

Andre

Re: connecting a bosch 3237 to a fein turbo II

#5

Re: connecting a bosch 3237 to a fein turbo II

Ed Mulligan, Cape Cod

>My Festool vac hose fits many of my non-Festool portable power tools. I don't know if it will work with your Bosch sander. Perhaps someone else will speak to that.

Re: connecting a bosch 3237 to a fein turbo II

#6

Re: connecting a bosch 3237 to a fein turbo II *LINK*

LGuthrie - Merrill, Wi

>Do you have the Bosch hose adaptor, Bosch #RS006 ? The o-ring on the round end makes up the difference in diameters and holds the hose on securely. I have a 3725 (same sander, 5" pad) with adaptor connected to a Turbo II.


Bosch Hose Adaptor

Re: connecting a bosch 3237 to a fein turbo II

#7

Re: connecting a bosch 3237 to a fein turbo II

andre mallegol

>I do have the RS006 Vacuum Adaptor. No O ring in the package. I'll check at Ace and see if I can find an O ring that fits. Thanks for the lead.

Andre