Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Dantesque chair *LINK*

Posts

Dantesque chair *LINK*

#1

Dantesque chair *LINK*

Fred Davis

>I have made a few chairs in my time , but this one is easily the most complicated , especially the assembly and the number of pieces.

Taken from a 1959 DeltaGram yearbook which I have had since it was published, so you can see right away, haste was not a factor in the making.

The chair I copied is in the Philadelphia Fine Arts Museum, it was donated by Baroness Von doorn and it is called a Dantesque, Florentine folding chair, circa 1525.

Wood is native Black Walnur and the finish is CAB lacquer "rubbed effect" over Vinyl sanding sealer.

I am glad I didn't have a order for eight ;-))

FredD


http://picasaweb.google.com/lh/photo/O_P8_QWHJ9Ml9EYs2HMn2w?feat=directlink

Re: Dantesque chair *LINK*

#2

Re: Dantesque chair

George@Colonel's Workshop-Havertown PA

>Good Afternoon Fred,

I wouldn't even atempt to build one of those. You deserve a hero medal for all that successful work. It looks extremely complicated. And I see if one part looks not quite right, the final version won't look quite right either! Do you have another pix of the seat itself? Its is an outstanding effort, and surely worthy of a Shop Shot.

George

Re: Dantesque chair *LINK*

#3

Re: Dantesque chair

steve mackay

>I saw "Dantesque" and had to look. Yes they are ! VERY cool !

Re: Dantesque chair *LINK*

#4

I'm sorry, Fred

Joanne in Pt. Pleasant, PA

>but that shop is way too clean and tidy to have produced such a chair! It's so clean in there, he didn't even allow his model to put her feet on the floor!

Beautiful job on a complex chair, wherever it was built! ;-)

I think I'm with George and I'm glad a chair (or set) like this is not on my todo list.

Re: Dantesque chair *LINK*

#5

If you were expecting a visitor that dignified

Bill Houghton, Sebastopol, CA

>wouldn't you clean up?

I have to confess that, when I saw the reference to Dante, I was picturing a chair involving one of the circles of hell - that one looks more like reaching paradise by self-sacrifice. Hard work yields much joy.

Re: Dantesque chair *LINK*

#6

Re: Dantesque chair

Dave Tenney

>Wow!

Did you use a router to copy some of those parts?

I'm not sure I would even attempt a project like that...Thinking about it gives me a headache.

Dave

Re: Dantesque chair *LINK*

#7

Re: Dantesque chair

Fred Davis

>Dave,

you have the headache part right , I did not feel comfortable or good enough to blow up Al Warkaske's drawing which was on different size grids , so I asked Ellis for some help.

He gave it a good try, much better then I could, and because of the width of his lines , I finally took it to a Architect I know , whose Female Senior Draftsperson , made me full size paper templates I glued directly to 3/4" Plywood and made patterns that way.

I found out to my sorrow, that the center seat fillers were off by a large bunch in Warkaske's drawing and I didn't discover this until I had made everything and started assembly.

When I post a better pic of this part for the Colonel, I will also show the difference between what the drawing's cutting list showed and what really was the correct size and hole center location.

Thanks to everyone for the kind words,

FredD

Re: Dantesque chair *LINK*

#8

Re: Dantesque chair -Spectacular, Fred!

Bob Entwisle in NJ

>

Re: Dantesque chair *LINK*

#9

Re: Dantesque chair

Winnemucca Lynn

>I was on the outskirts of Oxford, England a few years ago and the Bed and Breakfast I stayed at one night had a set of several of these chairs. I know I have a picture of it around here somewhere. My landlady said that they had them made up for her family.

Lynn

Re: Dantesque chair *LINK*

#10

JL

Very nice!

JL

>

Re: Dantesque chair *LINK*

#11

Ellis Walentine

It came out very nice, Fred

Ellis Walentine

>It even looks fairly comfortable. I'm glad you were able to get those curves right.

Nice work.

Ellis

Re: Dantesque chair *LINK*

#12

Fred Looks absolutly great.

Larry in NW Ohio

>

Re: Dantesque chair *LINK*

#13

Re: Dantesque chair

Bill White

>Fred, ya didn't tell us how long it took you to complete that project.

Bill

Re: Dantesque chair *LINK*

#14

Re: Dantesque chair

Fred Davis

>Off and on for a couple of months or more , done it , in my spare time.

FRedD

Re: Dantesque chair *LINK*

#15

Re: It came out very nice, Fred

Fred Davis

>Ellis,

it is actually more comfortable then you might think and Elaine is making a Dark Red Velvet cushion for it to boot.

FredD

Re: Dantesque chair *LINK*

#16

Re: Dantesque chair

Joseph Mulherin, Sr

>Fred, where did you get the plans to make this beautiful piece of art?

Re: Dantesque chair *LINK*

#17

Re: Dantesque chair

Fred Davis

>Joseph,

I took DeltaGram and later Flying Chips , Delta's really good for it's time, woodworking journals from the time I was a Freshman until the GD government finally squawked loud enough about showing machines being used without guards, until it forced Delta to stop publishing for fear of litigation.

That is what a Delta rep told me anyhow.

Somewhat like the current thread about Wood Work mag falling victim to corporate bean counters.

Anyhoo , to answer your question , the plan is in the 1959 DeltaGram yearbook.

If you don't have access to that and few do , let know and I will scan the plan and email it to you.

FredD

Re: Dantesque chair *LINK*

#18

Re: Dantesque chair

Fred Davis

>Also for those who may be interested, in that 1959 yearbook is a small table with fold down extensions ,circa Henry the second , that I guarantee , women would kill to have and it's down the line for me sometime later this Summer.

FredD

Re: Dantesque chair *LINK*

#19

Re: Dantesque chair

joseph Mulherin, Sr

>Thank you, Fred, I tried to find on Google, but they found out that the magazines are not available anymore. So, please make me a copy...and I do appreciate it. Gives me another project to take up my retirement playtime.... hahaha

Re: Dantesque chair *LINK*

#20

Re: Dantesque chair

Ed Mulligan, Cape Cod

>Fred,

I've had a yen for a while to make one of these but lacked a plan or access to an original chair. Thanks to you I found a 1959 Deltagram yearbook for sale on the internet and it's on it's way to me.

Ed

Re: Dantesque chair *LINK*

#21

Re: Dantesque chair

Fred Davis

>Ed ,

when you get started let me know , the center fillers size and shape and hole centers are wrong.

FredD

Re: Dantesque chair *LINK*

#22

Fred, thanks for the tip!

Ed Mulligan, Cape Cod

>I'm going to print a copy and put it in the book with the plan.

Ed