Re: Fire hazard!
Charlie Self
>Ellis,
For an article for Woodwork, I melted wax in the shop, BUT...I used a new hot plate, and never put wax or solvent near it until it was heated and checked to show NO red. I also kept an extinguisher next to me for the entire process.
Mix beeswax, carnauba and paraffin in varying percentages for the greatest hard wax for saw tables. Solvents I used included odorless mineral spirits, which worked just fine. Add more carnauba and a tube of graphite car lock lube to make a great lube to brush onto gears in a table saw, etc. A brass bristle brush works great, one of those that looks like a toothbrush for a robot.
In general, though, shop mixing of waxes is a serious no-no. It was just too damned cold to do it outdoors. One session provided me with enough wax for the rest of my life.
Those little fruit jelly jars make great containers. I bought a new case (IIRC, two dozen), and had trouble with my wife sneaking in to get a couple when she was making jam later in the year. I ended up using a variety of wide mouthed tins and jars. Small is better, I think. On the three ounce, maybe four, side.