Re: Cat5 wire and electricity...problems?
Dan Donaldson
>Sounds like a great solution. Where did you get the hardware for the fiber link? (converters, optical fiber, connectors etc.)
Knowledge You Can Build On — Est. 1998
Re: Cat5 wire and electricity...problems?
Dan Donaldson
>Sounds like a great solution. Where did you get the hardware for the fiber link? (converters, optical fiber, connectors etc.)
Re: Cat5 wire and electricity...problems?
Scott Crumpton
>I got lucky. Ran across some spool ends from a major install where I work. The media converters were from a local surplus house. Most of my expense was in buying the connectors.
Media converts run around $80 each and a 30 meter fiber jumper with connectors pre-installed is around $70. Total cost would then be around $230 to buy it all new. The 30m jumper is the longest I know of, if the distance is more you can use more than one jumper with a coupler. You'd just have to have a midpoint in the run where you could make the coupling.
I think I ended up spending around $150 total including the extra connectors needed to splice my 3 sections of cable. Well worth it considering what's connected to it.
Do a Google search on "fiber media converters" and "fiber jumpers" for suppliers. The important spec is to match up the fiber mode, and connector type of the jumper with the converter. Multimode converters are cheaper. (The 3km distance limit shouldn't pose a problem.)
When pulling the pre-terminated jumper, protect the connectors and pull the cable, not the connectors. Also, don't knot or kink this stuff, bending it to a radius less than 2" under tension risks breaking the fiber.
---Scott.
Re: No argument here
Fred Davis
>Well Dan , if the problem is more prevalent then I thought ,why don't the maker s use a little shielding around the transformer, maybe a little Faraday cage?
I know , I know , it's not cost effective, but it is also irritating after the novelty wears off .
FredD
Re: No argument here
Dan Donaldson
>I think that you misread my post. I wasn't saying that it was prevalent or not. I was saying that even if you are the only one in the world with the problem, the prevalence or lack thereof doesn't matter to you because you have the problem and for you it is 100%.
Because of the way these things work, there is not much you can do as a manufacturer unless you have total control over how it is installed and connected. A faraday cage wouldn't work because it is the antenna effect that makes the circuit function and the cage would shield it and prevent it from operating. There wouldn't be any false trips, but there would also not be any desired ones ;-)
I am not minimizing your problem but am saying that there are a lot of variables in it and in order to fix it, you would need to do a bit of experimentation. The problem is recreating the conditions that cause the problem in order to do any testing. The nature of the beast prevents the manufacturers from doing much because the installation parameters can have a significant effect on the operation.
Re: No argument here
Fred Davis
>In the interest of not beating this to death Dan, this will be my last comment on it.
The transformer and lights came with instructions even I could understand and were followed .
The lead travels no more then six feet from hinge to transformer and the feed from the transformer to the four lights is less then four feet in the longest feed.
Outwater Plastics had this and many other cabinet lighting arrangments in their catalogue and this is the first one to have a problem for me.
But then in my experience , if I depart even slightly from a conventional , you name it doodad, then I can look forward to having it act up in a manner no one else has experienced.
Next time I may use just a key socket and string. ;-))
FredD
Re: No argument here
Dan Donaldson
>It is possible that the particular product that you purchased is defective, in which case, maybe you should complain to the manufacturer. It is also possible (though not likely;-)) that your particular location has something that is completely unique and enables the lightning pulses to affect circuits at your location in a manner that occurs nowhere else on Earth.;-)
That said, I have seen some very interesting effects from lightning that were finally diagnosed as coming from improper grounding of power poles that were sometimes a mile or 2 away from the house with the problem. I was involved peripherally in an insurance investigation of a horse electrocution. (they are more susceptible than a person to electrical shock) They were able to prove that the problem was caused by a combination of a ground fault leak in a hot water heater in a house down the road and a light pole with an broken ground. This caused a voltage potential in a water trough that killed the horse. They spent a lot of time on this one because the horse was insured for a lot of money.
Re: I just ran into this.........
Jay Lombardo
>The way they deal with it in the code is that the insulation of all the wires in the conduit has to be of equal value. Typical wire feeding his service in the conduit will be THHN 600 Volt. Cat5, telephone cable, coax, doorbell, thermostat, etc. do not have 600V insulation, therefore they cannot be in the same conduit. I have run data in the same conduit many times but the wires were 14ga THHN twisted pair. The newer equipment is inherintly resistant to the noise induced in the conduit. In the old days (10yrs ago:) everything had to in separate conduits, cross at 90 degree angles and God help you if you had a solenoid valve anywhere close. When the magnetic field collapsed the spike would would be induced into the data and lock up the processors. If you pulled 14ga thhn in the pipe for telephone it would be technically legal but you wouldn't be able to hear over the electrical noise on the line. I would drop another 1" for all the low voltage. To my knowledge there is no 600v rated cat5.