Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Another burl question?

Posts

Another burl question?

#1

Another burl question?

Barry Irby

>I have access to an oak burl that may be five feet in diameter. Is there any place around that would slice it into veneer for me? A custom veneer slicing operation sort of like the guys that own bandsaw mills. (I'm in central VA)

Re: Another burl question?

#2

Re: Another burl question?

Larry in NW Ohio

>Barry you do know "Diameter" is across, not from top to bottom{:-) Boy that was some big tree. Where did you come across that? Larry

Re: Another burl question?

#3

I would post a picture, but

Barry Irby

>My camera only takes 3.2 megapixel pictures. This burl is so big it has its own zipcode.

Re: Another burl question?

#4

JL

I found one like that recently while..

JL

>address canvassing. Can you deburl a tree without cutting it down?

Re: Another burl question?

#5

Re: I found one like that recently while..

Barry Irby

>Supposedly you can remove a burl from a tree without killing it. Obviously that would depend of the size and shape and location of the burl and the health of the tree. If the burl were on a limb that could be removed, it might be no problem. Or, if the burl were one that is like a wart it might be possible, but if the burl were big enough to be really interesting, I would be reluctant to cut such a large chunk out of the bark. I am not an arborist, so I don't really know. Cutting such a large piece off would invite insects and disease.

What would be more interesting to me would be to see if it were possible to "seed" or otherwise cause burls to grow on other trees or in more locations on the same tree.