Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

ROS dieing?

Posts

ROS dieing?

#1

ROS dieing?

Larry in NW Ohio

>My ridgid ROS doesn`t seem to be sanding right. It seems to slow down when I put the sander on the wood. It`s not the motor it`s the paper that slows down. I also noticed that when I shut it off the disk just free wheels for a lot longer than it use to. What am I missing here, I don`t think this is right, is it? Thank You Larry

Re: ROS dieing?

#2

Re: ROS dieing?

Barry Irby

>Mine is not a Rigid, its a PC 333, but it has a O ring (?) made of something clear under the platen/shoe/disk. That broke and fell out and the sander did not work right anymore. Can't remember the symptoms, but it cost a couple of bucks at the repair center and was easy to install.

Re: ROS dieing?

#3

That's the answer

Bricofleur

>Yup! That's the answer. I would have call it belt, but "O" ring is okay.

The belt/"O" ring that drives the orbiting base dries out with time and breaks. I would call this "normal wear".

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: ROS dieing?

#4

Re: ROS dieing?

david schaefer fairbanks ak

>sorry to hear this...my Mikita ROS after 15 yrs of service quit .... went to the local BORG and got a Ridged.... tell me that Im not in deep caka...

Re: ROS dieing?

#5

Re: ROS dieing?

del schisler

>i have the 6" ridge ros and it works very well Kinda heavy but it sure works I use a air hose and blow out after each use Like to pick up a like new sander each time I belive mine is a couple yrs old I use it every day A good work horse

Re: ROS dieing?

#6

Is the O ring/belt replaceable?

Mike Farinella

>

Re: ROS dieing?

#7

It Surely is Replaceable, and easy to do

George@Colonel's Workshop-Havertown PA

>Good Morning Mike,

I've personally replaced my O Ring a couple times in the P+C 333. I do not have first hand knowledge of the Ridgid mechanism, never having taken my two Ridgid sanders apart.

George

Re: ROS dieing?

#8

Re: ROS dieing?

George@Colonel's Workshop-Havertown PA

>Hello Dave,

My two are the 5 inch machines, and are capable. I do favor the #333 by P+C, but that is more of a personal foible.

George

Re: ROS dieing?

#9

Re: It Surely is Replaceable, and easy to do

Larry in NW Ohio

>I found out that the rubber "pad" just under the sanding disk is what they call the brake. That rubs under the disk and controls the rotary action of the disk. Mine is wore down, so the cheapo I can be, I took it apart and took the bearing out of the aluminum ring the disk mounts to and put a couple of paper shims in between where the bearing and where it slids into so as to pull the disk down farther into the break. So this will give me some time before I need to buy a new ROS or get a new part. I don`t really care for this setup, so I may look around.Larry

Re: ROS dieing?

#10

Re: ROS dieing?

Jim Dillon

>Larry,

The symptoms you describe sure sound like the belt broke, at least if the internals are like my PC-333. The belt is just a small "O-ring" maybe made from polyurethane or something. Easy to replace and I have done so twice(?) in 10 years. I bought an extra one at the time, ...just in case. Probably couldn't find it though ;-).

Jim