Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

QSWO Dining Table

Posts

QSWO Dining Table

#1

QSWO Dining Table

HC Sakman will be @ Victoria LV APRIL 13th.!

>Hi Again,

This piece also went to the same home along with the cherry/rosewood entertainment console posted below. 50" round table w/ 19" wide folding leaves. The flakes in these boards are pretty spectacular. Top is 15/16" thick. Center of the base is 5" square. In between the double beaded edges of the base are concave profiled. Center leaves hinged with Soss hinges, syncronized top slide is from Hettich.

Embedded rare earth magnets holds the extension leaves or the two halves of the top together without any locks under the top or the leaves.

Stained w/ Mohawk medium dark walnut then 2 coats of conversion varnish sprayed.

Chico...



Photobucket



Photobucket



Photobucket



Photobucket




Re: QSWO Dining Table

#2

Re: QSWO Dining Table

Larry in NW Ohio

>As usual, Mr. Sakman, that is a very stunning piece of woodworking. That just about says it all. Larry

Re: QSWO Dining Table

#3

Re: QSWO Dining Table

Bricofleur

>Great! Really nice work! I particularly like the shine. I also like the profile you made along the legs. How did you make this profile?

Congrats,

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: QSWO Dining Table

#4

Re: QSWO Dining Table

George@Colonel's Workshop-Havertown PA

>Good Evening Chico,

You nailed it again, my friend. I admire the selection of ray wood in the top, as well as the color/shade which sets it off so spectacularly. I'll be doing a breakfast/kitchen table for #2 daughter soon, and I hope it is half as lovely.

George

Re: QSWO Dining Table

#5

Re: QSWO Dining Table

Randy

>Really nice...

Could you post the part number of the Hettich slide?

I just looked through the catalog and couldn't find any synco slides.

Thanks

Randy

Re: QSWO Dining Table

#6

Re: QSWO Dining Table

Jim Shaver - Oakville, Ont

>Wow,

I love that design Chico, That pedestal is beautiful!!

I love QSWO, I smell a trip to my QSWO supplier soon as well!!

Take care,

Jim

Re: QSWO Dining Table

#7

Re: QSWO Dining Table

Kirk (KC) Constable

>That beading detail on the pedestal really looks good!

kc

Re: QSWO Dining Table

#8

Re: QSWO Dining Table

T Rex

>Beautiful! Beautiful! Great work.

Did you work from a set of plans? If so, can you tell me where I can get these plans?

Thanks,

T Rex

Re: QSWO Dining Table

#9

Re: QSWO Dining Table

Nick Tuzzolino

>Hi Chico: QSWO is hard to beat. What a beautiful piece. Must weight a ton. Love the base. Thanks for showing.

Nick

Re: QSWO Dining Table

#10

Re: QSWO Dining Table

HC Sakman --- Victoria,BC. CANADA

>Thank You TRex.

Sorry, I never work from plans. Although this is a pretty straight forward table design, I suspect it'd be easy to find a set of plan for something similar.

Chico...

Re: QSWO Dining Table

#11

Re: QSWO Dining Table

HC Sakman --- Victoria,BC. CANADA

>Thank You Randy.

Sorry, I don't know the # myself. Somebody ordered this from my supplier but nobody picked it up. They slashed the price to get rid of it. It goes for $250 but I paid $100. This is the model with steel wires and rollers, movement is very nice.

Chico...

Re: QSWO Dining Table

#12

Re: QSWO Dining Table *LINK*

HC Sakman --- Victoria,BC. CANADA

>Bonjour Serge.

I've used these two bits from Lee Valley. First, cut the beads, than the half radius cove bit, bearing of it riding on the bead. Of course, you need to carefully thickness the stock to match up with bit's dimensions, where the bearing fall onto, etc.

http://www.leevalley.com/wood/page.aspx?c=2&p=30157&cat=1,46168,62157&ap=1

http://www.leevalley.com/wood/page.aspx?c=2&p=30150&cat=1,46168,62157&ap=2

Merci beaucoup,

Chico...


this is the beading bit

Re: QSWO Dining Table

#13

Thank you ALL for your kind words.

HC Sakman --- Victoria,BC. CANADA

>