Re: Stunning!
HC Sakman will WALK IN LeeValley APRIL 13.!!!!
>Thanks Jim. Please read my reply to Fred above.
Chico...
Knowledge You Can Build On — Est. 1998
Re: Stunning!
HC Sakman will WALK IN LeeValley APRIL 13.!!!!
>Thanks Jim. Please read my reply to Fred above.
Chico...
Pivot Hinges and the Top
Alan Young
>" I use hinges that my own design; It's oil impregnated bronze bushing and 1/4" steel rod. When the door frames are constructed this way, those 1/2" OD bushings are not embedded into the weak end grain. Also the location of the hinges (In this case top & bottom of the door) determine the applied forces on the door frame. When the hinges are on the edges, it makes sense to run the stiles full length. These hinges are like knife hinges, except their pivot point is an inch inwards than knife hinges. The outside section of the door (in between the outside edge of the door and the hinge's pivot point.) swings inside, which requires some room inside the cabinet, is a small price to pay for invisibility and the impressive smooth action of the hinges. This is my conclusion/preference."
I really like the no visible hinge concept. It appears that the lower hinge pin connects to the bottom apron, but with no upper apron the pin must connect directly to the top. Is there any concern with the top's seasonal wood movement affecting the alignment of the doors? Or do I have the logistics wrong? Anyway a great solution for a invisible hinges.
Alan
Good Eye Alan
HC Sakman will be @ Victoria LV APRIL 13th.!
>I was referring to my general concept of this style of door frame configuration.
In this cabinet, I've used Blum soft close hinges. As I said first, in my original posting, it was going to be (or started as) a "simple" cabinet.
"Barrel" hinges as I call them, requires aprons/stretchers to be drilled before carcass assembly. In this case, it was too late for that.
Chico...
Re: Cherry & Rosewood EC - Well Done!
Ray Carson - Lawrenceville, NJ
>The Cherry & Rosewood compliment each other beautifully. I like that you changed the "typical" rail and stile configuration. Thinking outside the box "so-to-speak". The angled sides are DA BOMB!!!
The vented doors gave me an idea for a corner EC cabinet I'm currently working on for my home. I'm glad you posted dimensions too, it means I'm in the ballpark with my design. I was afraid mine was too high.
Your cabinet is beautiful and yes......STUNNING!!
There's only one thing I'm not crazy about and that's the little copies (the wings) of the vented doors carried down below at the legs. I COMPLETELY understand why you did it, and it works. It's just not my taste. And quite frankly.......you didn't build this for...well me, now did you? :-)
I wish I had an ounce of your talent. I love this piece.
Ray
Re: Wonderful except...
Dean Lapinel
>Picky of me but the visual weight of the two shelves could have been diminished by adding rosewood trim to the top side. that would have given the shelves a more trim look that also matched the rest of the gorgeous design.
Re: Latest Work--Cherry & Rosewood EC
Fred Davis
>Yes you did Chico and thank you for taking the time to explain it, nice work always is interesting to me.
FredD
Latest Work--Cherry & Rosewood EC
HC Sakman --- Victoria,BC. CANADA
>Again, Thank you All.
Chico...
OH MY GOSH
roninkokomo
>You really do some very outstanding work!
Re: Latest Work--Cherry & Rosewood EC
Stephen Kirk in Quakertown PA
>Your work is as beautiful as ever. I love the transition of the vented cabinet to the molding on the bottom. That looks so neat. And having ventilation in a cabinet full of electronics is a necessity these days.
This is a great project for me to study as I want to build an entertainment center like this for myself. I didn't want a full cabinet, just the low piece to hold the electronics. I still have a heavy old TV so I need a nice strong cabinet. You've given me some good ideas here. I'm looking to actually put the cabinet on casters and make the back removeable to aid in wiring and re-arranging furniture.
Thanks for sharing.
Re: Latest Work--Cherry & Rosewood EC
Jennifer@Indy.USA
>Chico this is gorgeous. I always love it when you put your fingerprint on what is often a traditional design. As usual a beautifully functional piece of art. Bravo!
Jen
Very fine, Chico
Ellis Walentine, Host
>Your use of contrast and detail is always a modern and refreshing departure from the darkness and heavy visual weight of a lot of period A&C furniture -- from the Stickleys and Roycrofters to FLW and even G&G. I also appreciate the balanced grain composition you have achieved in the legs and door frames. It's the little things that count.
Keep up the great work.
Ellis
Re: Latest Work--Cherry & Rosewood EC
AZ in Colorado Springs
>If it's not revealing a trade secret, how did you make the bent panels for the sides?
Nice looking EC, by the way
No Secrets...
Hikmet C. Sakman -- Victoria, BC.,CDN
>Panel is simply cut at the angles (each side different angle) and then glued back together. That's it.
Chico...