Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Latest Work--Cherry & Rosewood EC

Posts

Latest Work--Cherry & Rosewood EC

#1

Latest Work--Cherry & Rosewood EC

HC Sakman will be @ Victoria LV APRIL 13th.!

>Hi Everybody,

This was going to be a simple entertainment console. Initially, bottom shelf was going to have ventilation slots, but later on I thought I can do better than that. Doors were obvious targets for this change in design concept. After redesigning the doors with air intake slots, simple and straight lower stretcher was in need of following the doors somehow. This is the result.

It's 19" deep, 54" wide (top) and 31" high. Trim around the side panels and glass, as well as the handles are from the same piece of rosewood.

Then I put the "simplicity" behind and book-matched all of the cherry parts of the front.



Photobucket


This is after the electronics are placed on the shelves. There's a 54" LCD TV mounted on the wall.

Photobucket



Photobucket


All of the case and door frame members are joined with loose tenons.

Photobucket


The sides feature "bent" panel, following the shape of the legs. I haven't seen anything like it as in frame&panel construction, so in my mind it's unique. I am sure somebody else had done this before, though nevertheless, it's not commonly seen. If you've seen something similar, I'd like to know.

Photobucket




Top is made of two 12" wide boards. Only the ends are beveled, the rest of the edges received 1/8" radii treatment. Finished with many coats of hand rubbed oil-varnish mix.

Thank You.

Chico...

Re: Latest Work--Cherry & Rosewood EC

#2

Re: Latest Work--Cherry & Rosewood EC

Thomas Skaggs, Foothills of Mount Level

>Oh sure, you post THAT right after I posted a lousy turkey call? You are evil Chico! None the less, it wouldn't be right if I didn't admit this piece looks mighty fine. :-)

Tom

PS- I am making a couple of wine cabinets right now Chico. I send you pictures when done. T.

Re: Latest Work--Cherry & Rosewood EC

#3

JL

Stunning! How did you do the side panels?

JL

>Were they from solid cherry that you cut into 2 pieces or were they cherry plywood?

Re: Latest Work--Cherry & Rosewood EC

#4

Re: Latest Work--Cherry & Rosewood EC

Fred Davis

>I have watched your work progress Chico , for a long time and it is definitely "eye candy", very well done and a one off as usual.

That being said , I have a question, only you know the answer to.

I have noticed all of your rail and panel doors have the rail stopping the stile , is this a trademark or a assembly technique I am not familiar with?

FredD

Re: Latest Work--Cherry & Rosewood EC

#5

Nice design

Clint Searl, at the base of Haycock Mtn

>

Re: Latest Work--Cherry & Rosewood EC

#6

Re: Latest Work--Cherry & Rosewood EC

Mark Mandell - Gone Round In Jersey

>Nice touch to work the front vent into the design of the doors. I have that same cable box and it throws a lot of heat. I hope you don't wind up putting a powered fan in the cabinet.

Nice piece.

mm

Re: Latest Work--Cherry & Rosewood EC

#7

Beautiful, beautiful, beautiful...

Jim Dillon

>...Chico. I love the very tasteful use of the rosewood trim on the doors and side panels. But the short stretchers on the lower legs (front and side) really make the piece IMHO, and tie in so well with the door bottoms. Thanks for taking the time to post such nice pictures and giving me some inspiration for this summers projects!

Jim

Re: Latest Work--Cherry & Rosewood EC

#8

very creative....and elegant too

Bill Tindall, E.TN

>

Re: Latest Work--Cherry & Rosewood EC

#9

Yes! Yes! Yes!...

George@Colonel's Workshop-Havertown PA

>

Re: Latest Work--Cherry & Rosewood EC

#10

Re: Latest Work--Cherry & Rosewood EC

Ralph in Huntington Beach

>Very nice EC! I'm also curious about the stile and rail layout.

Don't play that 360 without PLENTY of ventilation!

Ralph

Re: Latest Work--Cherry & Rosewood EC

#11

Wonderful except...

Dean Lapinel

>Wonderful except for one visual aspect. I love the overall design and the careful selection of grain patterns.

Re: Latest Work--Cherry & Rosewood EC

#12

Dad blast it, Chico !!! You get me all mad!

Mark Valsi from Pasadena CA------WebKitFormBoundar

>Man, Chico, you have done it again. Your work is so good that at times, I'm ready to hang up my tools for good!

Another CLASSIC CHICO MASTERPIECE !!!!

AWWWWWWWWWWSOME JOB, AS USUAL !!

Re: Latest Work--Cherry & Rosewood EC

#13

They're patented!

HC Sakman will be @ Victoria LV APRIL 13th.!

>You can't just make wine cabinets...! ;-) Right on Tommy! Curious about the design though! Any sneak-peeks? Spy shots?

Thanks Tommy,

Chico...

Re: Latest Work--Cherry & Rosewood EC

#14

Re: Stunning! How did you do the side panels?

HC Sakman will be @ Victoria LV APRIL 13th.!

>Hi JL,

Panels are 8mm Baltic birch, veneered both sides, then crosscut in bevel and reglued. Quartersawn cherry grain matches pretty good.

If you look through the glass, you'll see the same veneer on the inside of the back panel.

Chico...

Re: Latest Work--Cherry & Rosewood EC

#15

Re: Latest Work--Cherry & Rosewood EC

HC Sakman will be @ Victoria LV APRIL 13th.!

>"I have noticed all of your rail and panel doors have the rail stopping the stile , is this a trademark or a assembly technique I am not familiar with?"

Hi Fred,

There're a few different reasons for that.

1-Structural:

I use hinges that my own design; It's oil impragnated bronze bushing and 1/4" steel rod. When the door frames are constructed this way, those 1/2" OD bushings are not imbedded into the weak end grain. Also the location of the hinges (In this case top & bottom of the door) determine the applied forces on the door frame. When the hinges are on the edges, it makes sense to rub the stiles full length. These hinges are like knife hinges, except their pivot point is an inch inwards than knife hinges. The outside section of the door (in between the outside edge of the door and the hinge's pivot point.) swings inside, which requires some room inside the cabinet, is a small price to pay for invisibility and the impressive smooth action of the hinges. This is my conclusion/preference.

2-Aesthetics/Visual:

I think running the rails from leg to leg avoids any grain interruptions caused by the stiles, especially when the rails are horizontally bookmatched. It's visually more appealing to me.

3-Trademark + more visuals:

I feel that I am in the business of originality. I strive to built my furniture looking unique. Since this door frame configuration is out of mainstream furniture style, I simply prefer it and yet I believe it goes well with my design points. I especially like the full length rails followed very well with the sides' rails. These horizontal members complete each-other and establish some unity to the cabinet design.

I hope I've managed to answer your question properly.

Thanks Fred.

Chico...

Re: Latest Work--Cherry & Rosewood EC

#16

Re: Latest Work--Cherry & Rosewood EC

HC Sakman will be @ Victoria LV APRIL 13th.!

>Hi Mark,

If you look at the back of the cabinet, above the top shelf, there's no back.

Also the shelves have blocks at the backs, keeping the shelves 1" away from the back of the cabinet, thus creating constant air flow through the air intake slots at the bottom of the doors to the wide open upper back of the cabinet, especially when the electronics start generating heat.

Chico...

Re: Latest Work--Cherry & Rosewood EC

#17

Thanks Jim, George....

HC Sakman will be @ Victoria LV APRIL 13th.!

>

Re: Latest Work--Cherry & Rosewood EC

#18

Re: Wonderful except...

HC Sakman will be @ Victoria LV APRIL 13th.!

>Thanks Dean.... but what's the exception? Shouldn't I match the boards at the front?

Chico...

Re: Latest Work--Cherry & Rosewood EC

#19

Fabulous!

Philip Duffy

>-no need to say more. Fabulous! Philip

Re: Latest Work--Cherry & Rosewood EC

#20

Please; Don't be mad!

HC Sakman will be @ Victoria LV APRIL 13th.!

>Hi Mark,

Thank you very much. I don't want to make you mad.... !;-)

Almost everytime after I read your replies to my furniture postings, I keep banging my head to the door jams... I wonder why? ;-)

You weren't a cheerleader back in high school, were you? ;-) (Now I remembered SNL skids w/ Will Farrell!;-)

I appreciate your enthausiasm Mark. Thank You!

Chico...

Re: Latest Work--Cherry & Rosewood EC

#21

Stunning!

Jim Shaver - Oakville, Ont

>Hey Chico,

Stunning work, I love how you resolved the ventilation issue with a design feature that you extended to the case. I also like the angled side panels, I like that they follow the leg design.

I have a question about the doors, normally I make my rail and stile length in the traditional configuration with the stiles running full length, you did the opposite here, any ideas if you did that to develop the design or for other reasons,,?

Take care,

Jim

Re: Latest Work--Cherry & Rosewood EC

#22

See'dat, Chico

Mark Mandell - Gone Round In Jersey

>(Well, knowing you I inferred the shelf gaps.)

I tried to "box" that box with just convection cooling, but wound up having to pull the cable box outside the cabinet when we began having problems. The cable guy said "no enough ventilation", and I couldn't find a silent enough fan that would fit the cab and still be invisible. Next "base" I do, I'll put more time into designing for powered ventilation.

Re: Latest Work--Cherry & Rosewood EC

#23

Top Secret!

Thomas Skaggs, Foothills of Mount Level

>Chico,

I have two armed guards outside my shop 24-7. The wine cabinets are so secret that even I have to wear a blindfold while I build certain parts. That way I can't be captured and tortured into spilling all the beans!

Tommy

Re: Latest Work--Cherry & Rosewood EC

#24

Re: Latest Work--Cherry & Rosewood EC

Nick Tuzzolino

>Simply put,STUNNING. Cherry is my favorite and this piece is to die for. Nick

Re: Latest Work--Cherry & Rosewood EC

#25

I Like That Feature

George@Colonel's Workshop-Havertown PA

>Happy Good Friday, Jim,

Running the rails over and under the stiles seems to harmonize awfully well with the ventillation slots above and below the bottom stretcher. Enhances the "horizontality" of design, in my opinion. Its delicious in its good taste.

George