Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

My shop class was NEVER like this... *LINK*

Posts

Re: My shop class was NEVER like this... *LINK*

#2

Re: My shop class was NEVER like this...

Fred Davis

>I wonder what that instructor has in his approach , that the present teacher at my old school is clearly lacking.

Level of workmanship is like you say Dan., his disciplinary problems must be very minor.

I take a monetary interest In Abilene High woodworking department and I for one feel like the effort is being wasted to a large extent.

Not all due to the Instructor either, when he used to send problem students to the office , they were sent back with the word that there was no place else for them to be.

I bet Eugene Carlile is turning in his grave.

FredD

Re: My shop class was NEVER like this... *LINK*

#3

Re: My shop class was NEVER like this...

Barry Irby

>I used to think I would like to teach shop class. After looking at this I want to take his shop class.

Re: My shop class was NEVER like this... *LINK*

#4

Re: My shop class was NEVER like this...

Larry in NW Ohio

>In my shop class,it`s been so long ago,45years, that I can bearly remember it. We were lucky to make a decent sawhorse. Larry

Re: My shop class was NEVER like this... *LINK*

#5

Jesper, Denmark

Re: My shop class was NEVER like this...

Jesper, Denmark

>Just about all I can remember of my shop classes was that the teacher tested the glue-up of a 2 x 3 foot table top by laying it on the bench, half on- half off and slamming his hand down on the off part.

All 30 glue-up's broke, but not one in the glue lines!!!

Lesson �bout glueing and planing musta bin learned.

Teach was not popular afterwards, as we still had to re-plane and glue up again.

No further testing.

I think parts of the top still survives as something somewhere in the shop.

Re: My shop class was NEVER like this... *LINK*

#6

My shop class in junior high

Bill Houghton, Sebastopol, CA

>consisted of the teacher, one or two students who came into class knowing what they were doing, and with the money to make big stuff, and who got huge amounts of attention from the teacher; and the rest of us, who didn't learn much in class.

When we broke up my parents' house, I disassembled the embarrassing coffee tables I made for them from mahogany and those metal-plate-and-screw-in legs that were popular in the 1960's (think tapered maple cone with brass collars; think Bess Myerson, for those old enough to remember her), to salvage the mahogany - at least I'll be able to get some useful wood from it. These are what the teacher encouraged me to make, so he could devote more time to his star students.

Still a little resentful? Well, yeah; but maybe I wasn't then ready to learn, too.

Bill, went to the same junior high and high school as Tom Hanks; not nearly as good looking and a lot less famous

Re: My shop class was NEVER like this... *LINK*

#7

influenced by Straight Line Designs

Chris Friesen

>Looks like at least some of those projects were influenced by Straight Line Designs, out of Vancouver.

http://www.straightlinedesigns.com/

(hit the "enter site" at the top)

I particularly like their piece called "bad table".