Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Workshop Building- need help!

Posts

Re: Workshop Building- need help!

#26

Re: Workshop Building- need help!

Fred Davis

>Frank,

I would being doing you a disservice trying to update ten or eleven year old costs.

A couple of things you can think about , stick framing will not give you the cheapest way to build , on the other hand it is easily better for many reasons.

Warmer in cold weather ,cooler in hot, easier to hang shelving on , gives you proper wall thickness for insulation, wiring , plumbing , sound deadening, best frame for drywall, etc.

The way I would approach cost estimate is simply doing my old job as a contractor.

Design the minimum size building you could be comfortable in , get it on paper like a simple floor plan would be and take it to a lumber yard that does lumber packages from sill to truss and get their delivered cost.

Same thing for Mechanical systems, only get more then one estimate.

Roofing, drywall, Electrical, painting, windows, doors .

Give the same information to everybody that bids.

Add it up and compare the cost to your budget, some things like dust collection vary considerably in form and cost,

Try not to skimp on the building structure itself, that is not cost effective.

Cladding the outside , one can choose from many materials.

Shingles come in different weights and guarantees.

Concrete slabs are pretty much what you see is what you get, but you can incorporate zone heating in them which is the best way to heat a shop I think, even though I used a gas fired furnace, you can use a gas fired water heater to run the heat zones with.

I came around to slab heat after living in our house with it for eleven years. In addition to that , I went to one of my sawmill friends new shop and warehouse two weeks ago and he had Morton put up their version of a shop building with slab heat and it is very cozy , plus he heats the water with the same outside wood burning furnace that he heats his dry Kiln with.

Think about lighting needs and what is currently available , light is critical in a shop and need grows with your age.

Passive light sources like windows and skylights are a inexpensive source of natural light. Well worth the cost.

Bathrooms and laundry trays are a nice touch , but are not necessary if your shop is close to your home.

Don't skimp on wiring, or insulation , they both pay off big time done right with some forethought.

Lots of luck and remember a few minutes spent planning a use can save you a lot of money and maybe the need to do it over.

Email me anytime.

FredD

FredD

Re: Workshop Building- need help!

#27

THANKS FOR ALL OF THE GREAT IDEAS!

Chicago Bob

>