Widescreen HDTV stand - finally *PICS*
Tim Greif - West of Chicago
>My new 52" LCD needed a new stand so after looking at all the stuff available commercially, LOML and I were less than excited about anything we'd seen. If you're into black and tempered glass, there's plenty to choose from. Most of it looked like it was inspired by IKEA. I liked the demensional scale of some of it, just not the finish. So I decided to build one instead, and try to make it look more like furniture than hardware.
The design is my own based on looking at alot of stands at BestBuy, Frys and other home entertainment places, tape-measure in hand. I'm an engineer, so I like to design and build stuff. I can generally reproduce anything I see that I like. However the "creative" part of design (making it look good right out of the blue) is my stumbling block. That's why I need to go look at stuff before I start. Left to my own, I'd probably design something that would hold not only the TV, but my Chevy Silverado too. But LOML would not like the looks of it. She's the one with the creative juices. What we ended up with works pretty good.
Below shows the cut pieces of solid and oak ply that will become the stand.

Below shows a dry fitup with trials of molding and dentil piece.

Next is some of the finished peices ready for assembly. I used movable shelf cleats and screws for the lower shelves and pocket screws to attach the top so the whole thing is able to be disassembled and repaired if something gets damaged. The glued joints are the edge banding on the oak plywood, the face frame and face to sides, also pocket screwed. No visible fasteners or brads.

Below is the finished product.



THANKS FOR LOOKING



