Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Marathon Electric Motor

Posts

Marathon Electric Motor

#1

Marathon Electric Motor

Ken Oakley-Sunny St. Cloud, Fla.

>I fear that after years of hard use the 3HP motor on my Unisaw is about to quit. Smells and sounds that way. I had purchased the saw from Woodworkers Supply and they have replacement motors for the saw manufactured by Marathon Electric. Anybody have opinions on this brand. I don't need a motor that will last forever because I am 76 am starting to smell and sound bad myself.

Re: Marathon Electric Motor

#2

Re: Marathon Electric Motor

GalenV in Iowa

>The company that I retired from used Roots positive displacement blowers in horsepowers ranging from 1 1/2 to 30 to produce air rates of 35 to 3000 cfm at 5 psi. The package units we purchased usually had a Marathon motor. Just about all were 3 phase motors and 3500 rpm. The only time I can remember our service people having problems is when a contractor toasted them by improper wiring.

Marathon like a lot of manufactures have different types and quality of motors so cannot say if all are trouble free.

I don't think I would worry about buying one.

Galen

Re: Marathon Electric Motor

#3

Dale Lenz

Re: Marathon Electric Motor

Dale Lenz

>Ken: Have an older Walker Turner TS, Circa 1950(?) purchase in 82, direct drive. Motor went belly up about 97. Had the motor rebuilt, as the motor frame is not made anymore. The motor has served me well, especially since it's been rebuilt.

Re: Marathon Electric Motor

#4

Re: Marathon Electric Motor

Randy Johnson Connersville IN

>Sorry about the hijack, but dad spent most of his working life at Roots. He may well have designed some of the blowers your company used.

I have often wondered if it would be possible to design a cyclone using one.

As far as Marathon moters are concerned, I have installed quite a few since they are the most commonly available brand in these parts. They seem to hold up as well as any other, including Baldor.

Re: Marathon Electric Motor

#5

Re: Marathon Electric Motor

Larry in NW Ohio

>Ken If it were me I would have it rebuilt, it`s a lot cheaper and just as good if you have a good rebuilder. Larry in Ohio

Re: Marathon Electric Motor

#6

Re: Marathon Electric Motor *LINK*

Ken Garlock, Collin County Texas

>Hi Ken.

I have a Marathon 5 HP motor on my Ingersoll Rand compressor.

I would say that is a good recommendation.

Second, you might want to check out Electric Motor Warehouse, not the cheapest, but it will be a good Leeson motor specifically for your saw.


Elec. motor whse

Re: Marathon Electric Motor

#7

Re: Marathon Electric Motor

Ken Oakley-Sunny St. Cloud, Fla.

>This is Central Fla.,Land of Enchantment and Ripoffs. Every motor rebuilder I have ever contacted here says "It is toast and not worth fixing but have I got a deal for you". And that is before they even see it. I don't mind spending money on a sure thing. Just that much less my kids have to fight over when I go to the Big Woodpile in the Sky.

Re: Marathon Electric Motor

#8

Re: Marathon Electric Motor *LINK*

David Sparks

>I have a Marathon motor on my air compressor and haven't had any trouble with it. I also had a motor on my dust collector rebuilt years ago and had good luck with it. I do think that you can find a cheaper supplier than Woodworker's Supply. I like their catalog and their store, but their prices are high. I also like Electric Motor Warehouse.


http://www.electricmotorwarehouse.com/

Re: Marathon Electric Motor

#9

Re: Marathon Electric Motor

Chuck in ND

>I really can't imagine that a Unisaw can't outlive the life of someone in a non commercial enviroment. It may just be something simple like a starting capacitor, bearings or the dust blown out of it, or a bad switch or wireing. What is the motor doing that you think it's near the end ?

Re: Marathon Electric Motor

#10

Re: Marathon Electric Motor

Larry in NW Ohio

>Well if you could find someone that works on maintanence somewhere in a factory and ask them what they do when a motor burns. It`s to bad you live so far, we have a guy here that does rewinding and he`s very good and cheap. To bad you couldn`t you couldn`t ship it up here.Larry in Ohio

Re: Marathon Electric Motor

#11

Re: Marathon Electric Motor

Ralph Turney in Huntington Beach

>I purchased my first saw, a Delta Contractors saw, from Woodworkers Supply of Arizona about 20 years ago. When I got it, the motor was bad and after some hassles with WWS they replaced the another Marathon motor, but only after they made me take it to a electric motor shop. At the shop they said the same thing I said...it was bad! But while I was there talking to the tech, he said that Marathon motors were fine motors that were well made. One more motor went bad after that one, but I finally got past that bad batch and that saw and motor combo is still running today in my brothers shop.

Just buy another Marathon motor, like you said, no sense buying more than you'll ever use. :-)

Re: Marathon Electric Motor

#12

Re: Marathon Electric Motor

Ken Oakley-Sunny St. Cloud, Fla.

>It is hot-hot-hot, smoking and sounding like a 1971 Chevy Vega.

Re: Marathon Electric Motor

#13

Re: Marathon Electric Motor

Chuck in ND

>Have you ever tried spinning the motor by hand with the belts off ?