Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

OT How to flatten a pan?

Posts

OT How to flatten a pan?

#1

OT How to flatten a pan?

Barry Irby

>I have a Calphalon frying pan about 12" across. Supposed to have a flat bottom. Its not a slight dome. Concave so that it won't sit flat and everything runs to the center. Anybody know how to flatten it out? (I have a sledge hammer and am not afraid to use it.)

Re: OT How to flatten a pan?

#2

Re: OT How to flatten a pan?

Larry in NW Ohio

>I have that brand also and I just called them today @ 1-800-809-7267 and they told me what to do and where to send it. Of course theyay not replace it but I`m going to try, it`s worth a try. Larry in Ohio

Re: OT How to flatten a pan?

#3

Step one: all you need to get is an elephant......

Brian in Brighton

>

Re: OT How to flatten a pan?

#4

Re: OT How to flatten a pan?

John McGaw

>I'd imagine that they would exchange it if they have any sort of decent warranty. I have a set of ScanPan that I bought at least 20 years ago. It has a "lifetime" warranty. I've exchanged at least two pans and a lid handle and they never objected or even asked any questions. Send it in and they send back a new on within a week. This was an expensive set of pans but they certainly haven't made any money off of this particular set.

Re: OT How to flatten a pan?

#5

Re: OT How to flatten a pan?

Pete in Holland, MI

>It would look kinda beat up, but large saw blades are "tensioned" by hammering the outer couple inches of the blade to stretch its radius some, stretching the inner part like drum skin.

Re: OT How to flatten a pan?

#6

Whack it with a ded blow hammer

Clint Searl, at the base of Haycock Mtn

>

Re: OT How to flatten a pan?

#7

Re: OT How to flatten a pan?

Larry Barrett

>We have a similar Calphalon pan; gets a lot of use and, over time, develops a rounded bottom like yours. When needed (maybe once or twice a year) I set it upside down on the work bench, lay a scrap of wood on the bottom (now on top) and give it a good rap. Seems to work and lasts for awhile. Ours must be 30 years old now.