OT - Attics, insulation, flying squirrels, etc.
JL
>I have a continuing problem with southern flying squirrels. I have killed one (glue trap) and relocated a few others (7-8), the most recent one this morning. They are in the overhead between my 1st and 2nd floors.
When the house was built, they used trusses with a 2 x 8 as the bottom chord (it could be a 2 x 10, I didn't measure). Anyway, there are thick batts of insulation between the trusses from the edge of the 2nd floor outer wall to the edge of the 1st floor wall. There is no insulation between the floors. There are batts of insulation on the outer walls of the 2nd floor as well as in the attic.
I recently cut an access hole into my attic and framed it in. I installed 1/4" hardware cloth along the length of the house between the trusses in the area of the ridge vent - this is to prevent the flying squirrels from getting in through the ridge vent area. I don't really know how I'm going to put hardware cloth or block up the ridge vents of the dormers. The roof is metal and somewhat "slick".
So - anyone have any great ideas as to how to block off the ridge vents for the dormers? Also - the batts of insulation seem to be blocking the ventilation from the soffit vents to the ridge vent in the attic. Anyone have any great ideas as to how I can insure ventilation? The attic space is cramped (maybe 4' tall) and I have a lot of trusses to work around.
TIA.




