Need help with repro chair detail
A.J. Hamler
>Hi gang ...
I've reproduced the chair shown in the image below. That's Lt. Kelly at the Army of the Potomac headquarters tent in Culpeper, Va., in 1863.
the chair came out great, but I'll be darned if I can figure out something in the photo. If I've done this photo thing correctly, you should be able to see a detail below.
On the upright post of the chair right about elbow level is what appears to be the remnant of a hinge. It's held on by two screws, and is certainly metal. On the horizontal post of the chair, near the Lt.'s left thigh, there is a lighter area in the wood, and what seems to be a hole. Any idea what these things might be?
My first thought was that it was indeed part of a hinge, and that it was being used to "lock" the chair in the folded-up position. It appeared that the hole in the seat portion might line up perfectly with that hinge barrel when folded up, and maybe they slipped a nail or hinge pin in there to engage the hole, thus keeping the chair in the closed position.
I can't think of what else that hole in the horizontal member is for, but I don't think it has anything to do with the construction of the seat. Both the headrest and the seat crosspiece are attached to the sides with through-mortises. If you look at the headrest in the first photo, you can see where the through-mortise was pegged.
My second thought was that the hinge was a mounting point for a leather armrest. I've seen a number of other folding chairs -- although none of this design -- that had leather straps affixed that hung as kind of slings, acting as armrests. Because they were flexible, they didn't interfere with folding up the chair. Not sure if that was the case, though, as it wouldn't have made for much of an armrest, since the distance from the hinge to the hole is pretty short and low on the chair.
In zooming in to the photo, though, it seems that the barrel of the hinge has been pried or pulled open. Certainly it wasn't being used as a locking point, since you couldn't slip anything into the barrel and get it to stay. However, the ring that a leather strap might have been attached with could have once been in there before the hinge barrel was opened. It's quite possible that the stray armrest broke or was pulled out and the metal hinge was just left there, even though it's no longer being used for anything.
Any thoughts?
A.J.







