Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

entertainment center

Posts

entertainment center

#1

entertainment center

brandon mclean

>Should I use 1/4 inch or 3/4 inche plywood for the back of an entertainment center?

Re: entertainment center

#2

Re: entertainment center

Mamc

>I always use 1/4 inch for the back unless there would be a structural reason to be thicker. I cant think of one! Also keeps the piece light.

Re: entertainment center

#3

Re: entertainment center

Larry in NW Ohio

>I would think 1/4" would work the best, 3/4" work be overkill and add a lot of weight. Best of luck with your EC. Larry in Ohio

Re: entertainment center

#4

Re: entertainment center

Stephen Kirk in Quakertown PA

>I gotta think 1/4" would be fine. However, wherever you are housing all the electronic componenets, make sure you have good ventilation through the back, plus some good sized holes for cables and such. This is really important if the components are behind doors. The electronic components can create a lot of heat.

Re: entertainment center

#5

Re: entertainment center

kalebhjones

>Id go with the 1/4, the 3/4 would be too heavy when trying to relocate it.

Re: entertainment center

#6

Re: entertainment center

brandon mclean

>Thats what most are tending to tell me as well.. Thanks for the response..

Re: entertainment center

#7

Re: entertainment center

brandon mclean

>Thanks Ill need it!!

Re: entertainment center

#8

Re: entertainment center

brandon mclean

>Okay..

Thanks for the advice everyone..

Re: entertainment center

#9

Re: entertainment center

Kaleb Jones

>Okay.. thanks for the advice about the ventilation.. I will do this for sure..