Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Sanding discs =�PSA and . . .

Posts

Sanding discs =�PSA and . . .

#1

Sanding discs =�PSA and . . .

Nathan

>Very soon I'm getting a bench sander with a fairly large (14.5") diameter spinning disc. So soon, in fact, that I've started to get serious about getting some sandpaper for it.

Now, there are two varieties of round sandpaper of the required diameter I could buy. First is PSA (Pressure Sensitive Adhesive) backed and the second is just the paper with no adhesive. Needless to say, the latter is cheaper than the PSA - in fact, half price.

So, I would like to go with the plain non-PSA sandpaper but that brings another question - how to put the sandpaper on the disc so it doesn't fall off, but at the same time it should be fairly easy to peel off when the sandpaper wears out and needs replaced. I vaguely recall there being some kind of spray-on glue for this purpose.

Does anyone know what the "best practice" is for larger-diameter bench sander discs? Go with PSA at a higher price or . . . ?

Re: Sanding discs =�PSA and . . .

#2

3M makes adhesives

Mark Goodall - ATL - tooljunkie

>3M makes a variety of spray on adhesives, each with their own characterisics.... some mroe permanent than others.

3M-77 is one of them. I think that's the one I use for sanding discs.

Happy Woodworking!

Re: Sanding discs =�PSA and . . .

#3

Re: Sanding discs =�PSA and . . . *LINK*

Robin Corell in Atascadero CA

>I have a strong preference for paper backed discs and either freeman supply's brand of disc cement or Kint-Collins Master brand disc cement. It takes a bit more time to put a disc on using this kind of cement but when it comes time to remove it the paper and cement will peel off so easily that you will wonder what was holding it on.

3M brand supper 77 spray adhesive can be used but it is difficult to remove a paper disc in one piece that was adhered with it, and once the paper is off you will still need to use mineral spirits to remove the old adhesive. This applies to some brands of PSA backed discs too.


disc cement

Re: Sanding discs =�PSA and . . .

#4

don't fret the price.

Bill Tindall, E.TN

>disks last long time.

Re: Sanding discs =�PSA and . . .

#5

Re: don't fret the price.

Barry Irby

>I agree with Bill. By the time you buy the adhesive and account for the time it takes to use it, it won't save you much if anything over PSA disks. I have the packrat and cheap skate genes. I bought some of the adhesive and the second time I went to use it, the can had gone bad/clogged. I used it several times in several days and then put it away for a while (few months). And yes, I cleared the nozzle. I also tend to buy in bulk. It seems to simplify the process. Find what you want and buy a bunch of it so you won't have to do it again for a long time and so you have plenty anytime you need it. Now they tell me sandpaper has a shelf life. Whodathunkit? But, I think the seams in my sanding belts are failing quicker after they have been sitting on the self in boxes for several years.

Re: Sanding discs =�PSA and . . .

#6

Re: don't fret the price.

Gary Camp, Bend, oregon

>I made several disks out of 1/2 plywood and glue the sandpaper to the plywood disk and mount that on the sanding disk with screws. It makes changing grits a whole lot faster and cheaper.

glc

Re: Sanding discs =�PSA and . . .

#7

or Hook & Loop Discs

RJ

>You could also convert it to hook and loop so that you could use different grits easily.