Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Plywood?

Posts

Plywood?

#1

Plywood?

Ed Freestone

>I bought a 2x4 panel of something called sandply from the orange borg to cut up for bracing and legs on a t/s extension table. It's lighter and softer than regular plywood; screws driven into an edge cause splitting more easily. What is this stuff?

Thanks,

Ed.

Re: Plywood?

#2

Alan Young

Chinese Ply de jour?

Alan Young

>Every time I stroll through the Orange Borg sheet goods section there seems to be a new species of plywood from China. My guess is you have the latest version.

Alan

Re: Plywood?

#3

Fortune cookie rejects?

Art Silva

>

Re: Plywood?

#4

The McStuff that McDonald rejects

Mark Goodall - ATL - tooljunkie

>As you might know, McDonalds uses McStuff to make all their food.

They squeeze McStuff into thin strips sell it as french fries.

They squeeze McStuff into patties and sell it as burgers.

They fluff it up with air and make burger buns.

They freeze it and sell it as a shake.

They condense it, then freeze it and sell it in a cone.

Whatever material that is unfit to be used as McStuff is sent to factories overseas to make plywood or pet food and then shipped back here.

Happy Woodworking!

Re: Plywood?

#5

Re: Plywood?-Crap? *MN*

Justin Szeliga

>

Re: Plywood?

#6

JL

Re: Plywood?

JL

>Sandeply is a soft plywood with a "relatively" good looking thin outer veneer. I have used it now and then.

All in all however, I'd prefer a good veneer core poplar plywood. The Sandeply fuzzes up - you can't really paint it and it doesn't take a finish that well. I used it for some jigs and to build a drawer unit for my lathe.

Re: Plywood?

#7

Pretzels?

Al Kapocius

>Allus thought the stuff on the racks would make good stock for pretzles from the way they curl up.

Al Kapocius

Re: Plywood?

#8

Re: Plywood or Soylent Green Wafers?

GalenV

>If you remember this sci-fi maybe the soft plywood from China is the same?

Re: Plywood?

#9

Re: Plywood?

Fred Davis

>On a similiar note,

I received a McFeeley Screw company catalogue today as I do every year and noticed nearly without fail all of the Screw products with the exception of SPAZ screws which are made here and in Germany where they were designed, were made either in Taiwan or China.

That is pathetic.

FredD

Re: Plywood?

#10

Re: Plywood?

Glenn Madsen near San Francisco

>I bought some a while back for shelving materials for the sister-in-law's first grade classroom. Painted with a good grade acrylic enamel paint, it sufficed. But just barely.

It came from the pro supplier I regularly use, but with apologies. Once was enough.

Re: Plywood?

#11

Soilent Green Wafers Ain't Plywood

George@Colonel's Workshop-Havertown PA

>Its ply-people.

George

Re: Plywood?

#12

Re: Plywood? *LINK*

David

>I think this is the stuff you're talking about. I picked up couple of 18mm sheets from a local HD that was going under for twenty-something a sheet several months back. Worked ok with miter joints and with dados--using very sharp blades and zero clearance inserts. I first tried to use it for a tool cabinet with dovetail joints. Absolute nightmare (see the archives).


Sandeply

Re: Plywood?

#13

Re: Soilent Green Wafers Ain't Plywood

GalenV

>Must only use part of people since it's board FEET. Wonder what they do with the rest. Oh, bloodwood!

Re: Plywood?

#14

Heart of pine!!

Lee Schierer - McKean, PA

>

Re: Plywood?

#15

"Sandply" is.......

Howard Acheson

>.... a plywood made in South America if I recall corectly. It's not an oriental product. Home Depot has been selling it for a number of years.

Re: Plywood?

#16

Re: Plywood?

Ed Freestone

>Thanks for the info. I like their sustainable forestry techniques but I think the Sandeply product is a bit too soft for structural use in carcases, etc.

Ed Freestone

Re: Plywood?

#17

Re: "Sandply" is.......

Jay St. Peter - Southern, MD

>I've actually found their sandeply to be reasonable for use in constructing shop cabinets and such. Much better than the stuff they were selling for a while as birch at HD or maple at Lowes. My HD (one of the worst in the US BTW) now sells Birch made by Columbia. It's not the greatest stuff, but compared to the junk they were selling it's good. No metal/plastic inside, fewer voids (although there are some), and minimal delamination. You still have to search the stack. I'm convinced they leave it outside and let it weather for a while so you have to find the stuff that was in the middle and that they didn't destroy loading on the racks. The "maple" at Lowes is still complete, total, unadulterated ... stuff I won't use. The wavy plys on the edge are a giveaway.

Re: Plywood?

#18

Thought that was "poop-ply"

Mark Goodall - ATL - tooljunkie

>HD sold a plywood product from South America called "Para-Ply" which made me think it was made in Paraquay.

When you cut it the smell was horrible. It smelled like burning horse-poop... not that I know what buring horse-poop smells like, exactly, but it smelled like what I imagined burning horse-poop would smell like.

Horse-poop, cow-poop, buring-poop, whatever poop, it smelled horrible.

Ooops, that's a lot of "poops" in one post :)

Happy Woodworking!