Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Mineral Spirits vs. Paint Thinner vs. Turps...

Posts

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#26

Jason Roehl in Lafayette, IN

Only if you do what I stopped!

Jason Roehl in Lafayette, IN

>Last spring when I was painting at some large warehouses for a consortium of landlords we've done lots of work for in the past, a couple of their maintenance lackeys were trying to get a crusty, old gasoline-powered fork-tractor going. They decided they had flooded it at one point, and that's all I really caught of the conversation as I was barely within earshot. The next thing I know, I look over to see them with a ShopVac set up and ready to go. So I wandered over to see/ask what they were doing. They were going to use the vac to suck the gas out of the flooded carburetor! So I told them that if they wanted to do that, blow up the tractor, burn themselves good and/or die, they could, but at least give me some time to get some distance and pre-dial 911. They thought better of the approach. I told them I had heard of someone trying to do that to siphon gas from one vehicle to another, and lost both vehicles and his life in the process.

Funny thing, that gasoline...

I'll stick with more appropriate solvents for degreasing and cleaning.

Jason

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#27

Re: Am I going to DIE????!!!!

GalenV

>Barry

I'll go about the same time as you.

You washed tractor and machine parts in gasoline with your bare hands. The only way you could get the old black grease off your hands was washing in gas. You painted the barns and out buildings with old linseed oil based paint and cleaned all the brushed with gas by hand.

The only time I remember being worried was my uncle setting on an upturned 5 gallon bucket while washing brushes in another. His cigarette ashes would fall in the bucket as he leaned over to work!

But then I use to make silver pennies by rubbing mercury on them by hand too.

Just part of life and who knew what was bad back then?

Galen

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#28

So THAT explains it

Mark Goodall - ATL - tooljunkie

>"...They were going to use the vac to suck the gas out of the flooded carburetor! ..."

I have often wondered why they explicitly state to NOT use the ShopVac to suck up flammable liquids like gasoline. They repeat it several times in the manual.

I didn't think there could be anyone STUPID enough to do that, but apparently there are. Good for you for saving their lives, although you many have interfered with the natural cleansing of the gene pool :)

Happy Woodworking!

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#29

Jason Roehl in Lafayette, IN

I almost didn't...

Jason Roehl in Lafayette, IN

>...say anything due to the pyromaniac in me, but my respect for human life, no matter how bad they need to get out of the pool, has a greater vote in my actions.

Hmmm...I do have an old shopvac and plenty of extension cord...maybe there's an experiment in my future... ;^)

Jason

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#30

thinning the herd

Bill Tindall, E.TN

>We have a section in our paper titled "Thinning the herd". Had they proceeded their story might have made our paper.

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#31

evolution in action

John K Jordan

>We've always called it Evolution in Action. Often the culling process is immediately preceded by the incantation "Hey guys, watch this!"

JKJ

Re: Mineral Spirits vs. Paint Thinner vs. Turps...

#32

I always heard...

John in NM

>"Hold my beer and watch this"

Best example of that I remember was two guys playing catch with a rattlesnake. One died after four, count 'em, four bites.