Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Forrest Woodworker II or Tenryu Gold Medal?

Posts

Forrest Woodworker II or Tenryu Gold Medal?

#1

Forrest Woodworker II or Tenryu Gold Medal?

Scott in Montana

>Happy New Year all!

Now I've been a Woodworker II devotee for the last fifteen or more years. Lately I've heard more and more about the Tenryu Gold Medal 10" blade. Is this a better blade? Is it just different? Does it really need sharpening much less often?

I use a 5hp Powermatic 66 so power is not a concern and I've always used the 1/8" blade. The Tenryu is .111", I believe.

Anyone got some input to share?

Scott in Montana

Re: Forrest Woodworker II or Tenryu Gold Medal?

#2

Dance with the one that brung ya.

Virgil

>

Re: Forrest Woodworker II or Tenryu Gold Medal?

#3

Re: Forrest Woodworker II or Tenryu Gold Medal?

Chris Knob

>I agree, I'd stick with the blade you know and all of its familliar traits.

Wow, what blade envy I have!! A 5hp PM66 and $120+ blade decisions. Sounds like a shop I'd like to visit.

Re: Forrest Woodworker II or Tenryu Gold Medal?

#4

Re: Forrest Woodworker II or Tenryu Gold Medal?

Robin Corell in Atascadero CA

>The HP of the saw makes less difference than what you will be cutting when it comes to blade choice. I never cut melamine or veneer faced ply so for me just about any blade will perform well. You will get the best choices for you from talking to a knowlegable saw shop rather than reading adds in a magazine. Don't disregard the Everlast or Amana blades they too are good just less of an advertising budget.

With that saw there is really no reason for a thin kerf blade.

Robin

Re: Forrest Woodworker II or Tenryu Gold Medal?

#5

Re: Forrest Woodworker II or Tenryu Gold Medal? *LINK*

Clint Searl, at the base of Haycock Mtn

>For less than $200 you can get a custom blade tipped with cermet. Lasts 2 to 4 times longer between sharpenings.

Clint


Carbide Processors

Re: Forrest Woodworker II or Tenryu Gold Medal?

#6

Now I have serious blade envy

Chris Knob

>I go through 2-3 $40 Freuds a year. I'm always sharp...just not fashionable.

Re: Forrest Woodworker II or Tenryu Gold Medal?

#7

Kerf Size?

Thomas Skaggs, Foothills of Mount Level

>You might want to check the kerf size for the Tenryu. They used to have an odd width kerf as I recall. That's not a problem unless you sometimes count on cutting a 1/8" kerf. (I sometimes do). I don't know if this is still the case but you might want to check.

Tom

Re: Forrest Woodworker II or Tenryu Gold Medal?

#8

Re: Kerf Size?

Scott in Montana

>Yep, it's .111" rather that .125" (1/8"). Having a left tilter that does make a difference.

Scott

Re: Forrest Woodworker II or Tenryu Gold Medal?

#9

Has anyone used the Tenryu Gold Metal blade?

Scott in Montana

>