Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

dangerous router practice

Posts

Re: dangerous router practice

#26

Re: Good advice, Fred

Fred Davis

>Richard,

when I posted the original comments on climb cutting , if you read it thru , you will note I had Novice routers users in mind.

As Rick Christopherson pointed out in his very good treatise online , this is one of the "dirty little secrets of router use"

The Catch Twenty Two aspect being that until you try it , it is very hard to know what to expect if you overdo.

I have done it for many years and with some wood , it is a necessary skill.

I was lucky in having a guy experienced in that operation in one of the first cabinet shops I worked in to show me the approach and what to expect.

Still over the years , I have more wood come off then I wanted and had to refocus .

That thread immediately started off in all directions with some saying they do it with a router table, one said he used 3 1/2" diameter bits running in a "large router , 20,000 rpm, no soft start and no variable speed for days one end.

Those comments in my opinion invite a novice , like the one who asked the original question on the safety of it, to do something they would always regret.

You apparently have no problem, so now your comfortable doing it, how did you feel the first time ?? ;-))

FredD