Liquor/Display Cabinet *LINK*
Hikmet C. Sakman
>Good Morning,
The latest wine cabinet has been grown and got taller! (68") It took almost 8 weeks, last 4 being very solid workdays.
Curved sides were some challenge, but top drawer fronts and making the limited curly madrone stock just enough was the real challenge due to bookmatching every single door and drawer frame parts. I climatized (resawn and cut to rough sizes, then stickered.) the madrone in my shop for 3~4 months, and they kept moving! Like dealing with every other beautiful thing, patience and strategy were necessary.
This is a multi purpose cabinet. It'll display some fine crystals, hold fine silver cutlery, wine and liquor bottles.
Frame is bubinga from a single piece of 8/4 stock sized 1-1/2'x17'. (Only some of it is used!) Inside the upper display case is veneered with waterfall bubinga veneer. The lighter curly wood is locally cut, absolutely gorgeous curly madrone. All drawer sides are also madrone. Panels are all from the same flitch of madrone burl. All the black hardware is ebony. Bubinga stringing around the side burl panels are actually different in sizes for the upper and lower sections. (It's hard to tell in these shots.)
Style is my twisted A&C with some G&G touches, as well as some Japanese flair.
Everything is sanded to 600G with many hand rubbed coats of my mixture of oil varnish.
I never veneered a cabinet back with expensive burl before and it wasn't my intent to do so in this case, but I had to due to some sanding boo-boo... Oh well, back of the lower case is veneered with regular madrone.
Dovetails...as usual, very fine cut pins and tails. Flush cockbeading around the drawers are madrone with ebony stringing.
And my branding/logo detail, saying "HCS" in A&C style fonts, though It's my own design to combine the letters.
Top drawer, lined with real suede, for cutlery;
Second drawer is shaped and lined with cork (done in veneer press) for red wine bottles.
...and Third row drawers are also lined with cork on 1/2" thick bottom for liquer bottles.
Here are some other details from inside...
Waist (top) drawer fronts and upper doors are veneered over solid madrone to make the matching stock enough for everything. Veneers are exactly 1/16" thick, obviously shopsawn. Last detail... Upper door and top drawer frames are veneered in a way, looking just like solid wood, front and back. Substrate is solid madrone.
All the ebony handles are attached with fox-wedged dowels.
3/8" thick glass shelf has a concave front edge. Also the area behind the hinge end of the carcase are coved to accomodate the doors' swing.
I am sure..actually I know I've skipped many other worth-to-mention details, but I have to get back to work to fullfill another deadline!
Thank you.
Chico...
My website




















