Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Birch Plywood

Posts

Birch Plywood

#1

Birch Plywood

Ken Oakley-Sunny St. Cloud, Fla.

>The local Home Depot has not carrierd 1/4" Birch plywood for over 3 years. This morning I had to buy a couple boards of white pine to cut some things for SWMBO to do her thing on. While trying to find some that were a little above firewood grade a fellow came along with two sheets of plywood on a cart. At first I couldn't believe my eyes. I asked him if it was Birch and he said yes. I looked at it and it seemed to look good. Then I saw the little UPC sticker they put on the wood and sure enough it said "Birch Plywood" "Made In China".

Probably contains high levels of lead, melamine, and ground up cat bones.

Re: Birch Plywood

#2

made from illegally cut Russian logs

Robin Corell in Atascadero CA

>It may be a good product but it is made from illegaly logged tracts in Russia. contracts to clear the dead and disased trees are handed out and then the Chinese come in a clear cut the tract and pay off the local inspector. because the they have a permit they are allowed to transport the trees back to china. To add insult to injury the Chinese supply their own workers to do the logging so the local Russian economy gets zero benifit. If you would like to have any effect in changing this type of scenario then don't buy chinese birch ply.

It may cost you a few $$ more but FSC birch ply is available. Another good alternatice is radiata pine ply.

Robin

Re: Birch Plywood

#3

Warning!

Bill Tindall, E.TN

>I bought a 3/4" sheet a while back and it warped up like a potato chip. Several days after I bought it and it had dried it was still 18% moisture. Inside it had huge voids and instead of butt jointed plies they were lapped on top of one another and mashed more or less flat to result in a wavy surface.

Re: Birch Plywood

#4

What is the basis......

Howard Acheson

>...of your information?

Re: Birch Plywood

#5

It's dessicant!

Eddie Pacheco; San Jose, Ca.

>I keep telling you guys that HD uses that stuff to soak up the moisture generated from the wet lumber they sell there. They put stacks of it in different parts of the store......

Re: Birch Plywood

#6

Re: Birch Plywood

Dick Coers

>Oh yeah, that stuff is crap. I carried a couple of sheets in the back of my van this summer. Came out of work one day and my eyes starting burning when I got in the van. I had to assume that it was the formaldehyde. It warped and was just as described. One other bad symptom, the glue wasn't that good either. You could just about peel the veneer off with no effort.

Re: Birch Plywood

#7

here is a good place to start *LINK*

Robin Corell in Atascadero CA

>Here is a good starter article. it is long but well researched and broad in its scope. After reading this do a few google searches on some of the topics from the article and you will find plenty of other info. I only work with salvaged or sustainably harvested wood it is a bit of a passion of mine and has been for 15 years.

Robin


article