Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Elm, is there a going rate????

Posts

Elm, is there a going rate????

#1

Jesper, Denmark

Elm, is there a going rate????

Jesper, Denmark

>Is there a goimg price for 8/4 Elm?

Yes it is European, but the problem is the same over here - trees almost gone. I have some access to some fropm felled park trees and wonder what it should be worth?

Re: Elm, is there a going rate????

#2

elm market

Bill Tindall, E.TN

>I have never seen elm sawed as a commercial species in the US. In fact I have never seen an elm log on a log yard. So with no market there isn't any price to be found.

I have only seen one piece of furniture made from elm. It was attractive with a pink heartwood and white sap wood. But there must be some problem with elm as a furniture species or we would see more made from it.

Re: Elm, is there a going rate????

#3

Re: elm market

Fred Davis

>Elm is available at Kansas Hardwoods Mill most of the time , but you will find it fuzzy to work with.

FredD

Re: Elm, is there a going rate????

#4

$6.50 - $8.00/bf on west coast

Robin Corell in Atascadero CA

>There are almost 20 types of elm growing in the US most domestic as well as several from other parts of the world. Some like cedar elm are stringy and others like chinese are wonderful to work with. Red elm and siberian are some of my favorite woods for furniture. It looks familiar yet different. Because it has frequent changes in the grain direction when it is finished those areas have a sort of chatoyance that gives the wood the character of a well worn antique. Because it encapsulates silica it is very hard on cutting tools. It will machine and cut well with machine tools but does not work easily with hand tools. I have carved both siberian and american elm occasionally but neither would not be my first choice. Chinese elm is my wood of choice for chisel and hammer handles.

I just got a price on some 8/4 red elm in Portland Oregon for $8.00 and I purchased some 12/4 locally for $6.50 due to the difference in grade they were actually very similar in price/yield.

Re: Elm, is there a going rate????

#5

Re: elm market

Robin Corell in Atascadero CA

>you don't see any elm in the most lumber yards so no one is building with it. No one is building with elm so there is no demand for it. There is no demand for elm so you don't see it in most lumber yards.

Robin

Re: Elm, is there a going rate????

#6

Jesper, Denmark

Re: Elm, is there a going rate????

Jesper, Denmark

>Thanks Guys, that was enough of an idea of value.

Re: Elm, is there a going rate????

#7

I carry it

Tom Sontag - St. Louis

>Along with virtually any other domestic that grows around here, I have some elm on the racks @$2.50. And I have sold some too, but not as much as I could saw. It is very difficult to dry flat.

Of the ring porous domestics, I think elm and black locust are under-appreciated for fine work. Both look nicer than flat sawn oak IMO and deserve more use.

Re: Elm, is there a going rate????

#8

Re: elm market

Bruce, a MN Galoot

>Bill,

Elm is highly ring interlocked and is a bear to dry flat. Once dry, it is a gorgeous piece of wood, with coloration as you described. It needs to be worked with either very sharp tools or abrasives. I made a tool box, a la Gerstner, for my BIL, and it turned out great, but it wasn't fun to do. He had given me the boards as a legacy from his FIL's yard, so there was a lot of emotional attachment, otherwise I wouldn't have used it.

Bruce