Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Tall clock progress - door's done!

Posts

Tall clock progress - door's done!

#1

Tall clock progress - door's done!

Scott in Douglassville, PA

>Hi, all -

Well, one of my major hurdles is over - I mitered the beads on the bonnet door of the clock I'm working on, and glued the thing up. All the miters closed nicely. I'm very pleased. :^)

Next is moldings, including the arched cove that goes over the door.

Had to gloat. Thanks for listening.

Scott


img

Re: Tall clock progress - door's done!

#2

Great Progress, Scott,

George@Colonel's Workshop-Havertown PA

>Good Morning Scott,

I hope you are keeping record of your "time". Its really shaping up. You are almost ready to knock it over! Can't wait until I see a pix of the crest arrangement you decided upon.

George

Re: Tall clock progress - door's done!

#3

Re: Great Progress, Scott,

Larry in NW Ohio

>Yes Scott, The colonel is very good at making clocks, can`t let him get to close, they just fall over:-)))) Larry in Ohio

Re: Tall clock progress - door's done!

#4

Re: Great Progress, Scott,

Larry in NW Ohio

>I forgot to tell you, I taught him everything he knows in the tipping over department. Larry

Re: Tall clock progress - door's done!

#5

Re: Tall clock progress - door's done!

Jim Shaver - Oakville, Ont

>Looking Great Scott.

Take care,

Jim

Re: Tall clock progress - door's done!

#6

Nice work!

Tony - Memphis

>I know those were some tough joints and they look great! Any tips?

Tony

Re: Tall clock progress - door's done!

#7

Re: Great Progress, Scott,

Scott in Douglassville, PA

>You are almost ready to knock it over!

Don't say that! Gonna screw it to a wall at the inlaws' when I install it.

I'm now officially scared...

Re: Tall clock progress - door's done!

#8

Thanks, guys!

Scott in Douglassville, PA

>I appreciate the encouragement. Tony, I don't really have any tips for cutting the miters. I was lucky in that I marked 45 degrees on my saw last time I had it set up right, and got lucky with blade height and placement. Otherwise, I pretty much followed what I've seen on TV - cut the 45s with the tablesaw, stopped cut on the tablesaw to establish the cheek (???), and finish everything with a handsaw and chisel.

Need to get moving on the moldings one of these days (soon)...

Scott