Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

L&JG Stickley prairie chair

Posts

L&JG Stickley prairie chair

#1

L&JG Stickley prairie chair

Ed in Lawrence, KS

>Here are a few shots of the L&JG Stickley prairie chair that I finished over the weekend. It was built from plans drawn by Robert Lang. It is quartersawn white oak finished with water-based aniline dye, shellac, dark glazing, shellac (2 coats), and wax. The legs are quadralinear in construction using rabbeted miters (see my post from June 3, 2008 for pictures). I visited a local leather upholsterer over the weekend and left with a case of sticker shock when I heard what it is going to cost to have cushions made for the seat, sides and back. According to the upholsterer, I will need a full hide for the chair (we�re thinking of using buffalo instead of cow). That�s 50 sq. ft. @ $10-$15/sq. ft (the buffalo is the same price as for cow). So we�re already talking $500 - $750 just for leather. Add the tied coil spring seat and labor and we�re over the $1,000 mark pretty easy. The guy did mention that we could probably find cheaper leather on the Net, but that it would probably be of lesser quality with visible defects that couldn�t be worked around, and dye that might not be �struck through�, i.e. the dye doesn�t penetrate all of the way through. So, and I�m still mulling it, I�m suspecting that my Spring and Summer project might end up with a nice coat costing way more than my first car. But it should last at least my lifetime, and does not seem that far out of line when you consider that these chairs can typically fetch $2,000 - $5,000.


img

Re: L&JG Stickley prairie chair

#2

Re: L&JG Stickley prairie chair

George@Colonel's Workshop-Havertown PA

>Good Afternoon Ed,

You sure made a lovely chair. Beautiful workmanshop. That upholstery work sounds expensive, and I'd keep looking for leather elsewhere. The Marshall Unit--internal springs may have to be especially fabricated to specific dimensions, but you might also look around for them on the net. I did upholstery years ago, and recall the mark up was very high on materials. Keep shopping. Good luck. Nice job.

George

Re: L&JG Stickley prairie chair

#3

Re: L&JG Stickley prairie chair

Jim Shaver - Oakville, Ont

>Beautiful Chair Ed,

Love the design and finish. Sticker shock I know, I paid about $800 a chair for my Morris Chair cushions. The quality I got in the leather was well worth the extra input, they will last a life time and many more. I will also say getting less than the best you can afford will also make your work look less, so please consider the options that show off the chair if you can.

take it easy,

Jim

Re: L&JG Stickley prairie chair

#4

Re: L&JG Stickley prairie chair

Clint Searl, at the base of Haycock Mtn

>The beauty and workmanship deserve the finest upholstery. Go for it.

Clint

Re: L&JG Stickley prairie chair

#5

Re: L&JG Stickley prairie chair *LINK*

Robin Corell in Atascadero CA

>I Use Siegel of California when I need leather. The are very friendly and their prices are very good for the quality and selection. You will find cheaper prices but Siegel's prices include free shipping on orders over $75 so factor that in when comparison shoping. If you give rough diminsions for the largest square you need out of a hide they will acomodate you. Still you wil need to allow for about %25 waste.

Not sure if you know or care but buffalo hide is almost always waterbuffalo not American buffalo. and as others have said it is worth the extra cost of a frst rate set of cushions.

Robin


Siegel of California

Re: L&JG Stickley prairie chair

#6

Re: L&JG Stickley prairie chair

Bob Lang

>Nice work Ed.

Bob Lang

Re: L&JG Stickley prairie chair

#7

Not all of them were leather.

Ed Snow

>Great job on the chair.

Some of the period organics are really beautiful. Not as manly but . . .