Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Does a shrinking poly or other exist?

Posts

Does a shrinking poly or other exist?

#1

Does a shrinking poly or other exist?

Paul Waddle

>This concerns pouring plastic in a mold to make applique's( sp?). Actually,its the mold that I want to shrink. Heres the procedure-use some substance rubber compound? and push the applique into it,withdraw and let the imprint cure,shrinking 30-50%.I know,I know,chemist go the other way-try to find nonshrinking stable materials. It is intriguing,but does something like this exist??

Re: Does a shrinking poly or other exist?

#2

Shrinkydinks?

Al Kapocius

>

Re: Does a shrinking poly or other exist?

#3

I don't know but, *LINK*

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Here is a source for products like you are asking about. I think they have a good support group to ask.


http://www.sculpt.com/

Re: Does a shrinking poly or other exist?

#4

Re: Does a shrinking poly or other exist?

Robin Corell in Atascadero CA

>If the mold is made out of alginate it will shrink as it dries out. Alginate is what is used for dental impressions. I don't remember the percentage of shrink but it is substantial for a mold material. as it dries it will shring as well as lose its flexability and you may end up having to destroy the mold to pull your shrunken part and make a new mold or even make several intermediate molds to get you the desired amount of shrink. Also algenate will shring acording to its mass which means the thickest parts of the mold will shrink more which can result it substantial distortion.

for 30-50% you will most likely need to make a new aplique in the correct size

Re: Does a shrinking poly or other exist?

#5

Re: Does a shrinking poly or other exist?

Paul Waddle

>I thought the nonuniform thickness might be the biggest draw back. Thanks for the response,have a good wk end.