Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Auction site woes and caution (long)

Posts

Auction site woes and caution (long)

#1

Auction site woes and caution (long)

David

>I�ve been thinking about this for a while and how it would play out with list etiquette but was assured that this would be ok to post. My intention is not to bad mouth the E**y dealer but to give y�all a head�s up.

About a month ago, I finally won an E**y auction for a Stanley 5 � that looked to be in very nice shape. The pictures showed some light surface rust but a nice looking plane otherwise, real pretty wood. At the time, I didn�t think much of the fact that the last inch of the tail was cut off in the photo and that it was ever so slightly out of focus (both poor photo conditions not being uncommon). Seller�s description is as follows:

�Bidding is for this vintage Stanley/Bailey No. 5 1/4 Plane. It is in very good condition. The bottom is smooth with no pittting. It was well maintained. Would really clean up nice. Chip and crack free handle. Not to many better. Thanks for looking. Contact me with any further questions. � (item number 140269619226 if you'd like to see the pics).

I was quite excited when the plane arrived and I wasted no time opening and unwrapping the package. I can�t describe the feeling of my heart sinking as I immediately saw that the left edge of tail was broken off and that what appeared to be rust in the pictures was the previous owner�s name engraved in the plane�under the rust. I quickly searched through the box for the broken piece to see if this was shipping damage. It was not.

After getting over my disappointment, for the plane�s condition and my stupidity for not looking more carefully at the pictures, I pondered the ad and decided to contact the seller, Joe (who used the name of the orange big box in his online store). Joe responded immediately, apologized, said he is usually right on with his descriptions, and would refund my money if I wanted. I boxed up the plane and sent it back, he refunded my money, shipping included, and that was it.

I figured that Joe probably knew what he was doing, but hoped it was more professionalism than ratings-saving that prompted his actions. The latter was confirmed when the same plane reappeared a week ago. The only difference in the description was an insertion that vaguely mentioned the owner�s marks, nothing about the piece broken off the casting.

As I said in the beginning, I just want to give a heads up and urge everyone caution and safe bidding.

DGW

Re: Auction site woes and caution (long)

#2

Re: Auction site woes and caution (long)

Fred Davis

>Don't sweat the list etiquette, you did all of us a service by pointing out one of the hazards of buying from a auction , private seller or what have you, without actually being able to have the product right in front of you to check out.

I bought a lot of good deals in tools when the auction you speak of first cranked up a presence on the internet and found that for the most part , people were selling way under the market because I believe many weren't acquainted with tool values.

This is no longer the case, with most being dealers/junkshops, so I haven't been there in a long time.

If you patronize a local tool dealer continually , you will on occasion get a remarkable markdown in price.

Sad to say , but this economy has caused a flood of deals in anything you can think of.

Just check out you local newspaper.

FredD

Re: Auction site woes and caution (long)

#3

Re: Auction site woes and caution (long)

David

>I wish I knew where the local tool dealers are in my corner of Central NY. For other than the obvious reasons, I'm less likely to pass something up if it's already in my hands!

With few exceptions, I've had good luck with online auctions and even a pleasant surprise, e.g., Stanley 16 instead of a 9 1/2 and sweetheart by "accident."

What's killing me these days, other than the economy, is people running up prices days before an auction ends. Why bid a $10 item up to $150 with 4 days to go? Oops, I'm venting!

Re: Auction site woes and caution (long)

#4

Re: Auction site woes and caution (long)

George@Colonel's Workshop-Havertown PA

>Good Afternoon David,

I got interested ONCE, and put in a competitive bid on a Grizzly wet/dry grinder. I saw the price escallate and stopped bidding, knowing about how much a used tool was worth, and how much a new one would cost. My wife was aware that I had been bidding, and jumped in after I stopped. The tool was to have been her birthday gift to me. The trouble was that she didn't have a clue about its value. So, she overbid, was successful, and soon I received a surprise Grizzly grinder by UPS. But it was defective. The sharpening stone was frozen in place on the shaft, and the plastic gears became damaged when I tried to remove the wheel. I sent it back and got a refund, less the cost of NEW gears from Grizzly. Between the return freight and the cost of the broken gears, I could have almost bought a new machine. BUYER BEWARE! I don't even think about ebay bidding any more.

George

Re: Auction site woes and caution (long)

#5

Stick to WC Benefit Auctions!

John K Jordan

>