Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Painting Garage Floor Question

Posts

Painting Garage Floor Question

#1

Painting Garage Floor Question

Ed O'Neill

>I'm about to prep my unpainted garage/shop floor for paint and I need some advise. I've vacuumed the entire floor and repaired some hairline cracks using bondo/cement/stucco epoxy. My plan is to degrease the floor using a degreaser and then etch using the degreaser and etching solutions recommended by the paint manufacturer. In the past i've used muriatic to etch and have never used a degreaser. The floor is not greasy at all so I'm questioning the degreaser step since I'll be etching. I plan on using an epoxy paint. The degreaser and etching solutions are not cheap and I'm wondering if I can skip the degreasing step altogether and save some bucks using muriatic instead of the etching solution recommended. Any guidance or experience will be greatly appreciated. Ed

Re: Painting Garage Floor Question

#2

JL

Re: Painting Garage Floor Question

JL

>If you need to degrease, use TSP (tri sodium phosphate) and water. Muriatic acid and water should work just fine for a concrete etcher.

Re: Painting Garage Floor Question

#3

Re: Painting Garage Floor Question

Ed O'Neill

>Thanks Jl for the info. Ed

Re: Painting Garage Floor Question

#4

Re: Painting Garage Floor Question

Lee Brubaker

>When your etching make certain the garage is very well ventilated or you could damage your electrics.

Lee

Re: Painting Garage Floor Question

#5

Steven Antonucci

I wouldn't

steve antonucci

>I skipped that step, and I had a huge issue with the epoxy paint unbonding from the floor. It was so bad, that I wish I had never one it...

Steve

Re: Painting Garage Floor Question

#6

Re: Painting Garage Floor Question

Brian in Cheyenne

>You'll never regret using the expoxy paint! As long as you prep it well, and it sounds like you are doing it the right way, you'll love it.

The only thing I will add is to make SURE you add no slip flakes to the paint. Water on epoxy paint can be VERY slippery! Last thing you need is to fall...or for the mother-in-law to fall....just not a pretty picture!

Good luck!