Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

need strong joint for long glue ups

Posts

need strong joint for long glue ups

#1

need strong joint for long glue ups

john lucas

>My friend Brad Sells is doing a sculpture for the local hospital and part of the sculpture is a rough representation of a DNA helix. What he needs to do is make the helix part which will be made from glue ups of laminated boards. We discussed it yesterday and ideally he's wanting to make it about 2 to 2 1/2" diameter and will do a gentle spiral 26 feet up. The glue up etc is not the problem. What we are wondering about is the best joint to use to glue the 6 or 8 foot sections together. I recommended what I think is called a Scarf joint. A long taper with a notch at both ends. He doesn't want to use the standard shaper type joint used to put molding together because it would give it a machine made cheap look.

How would you all join these part together and do you think the wood can stand up to the weight at that length. He plans to do a test shortly. He's still in the finishing stages of the 4 human figures right now. The man is about 9 or 10 feet tall to give you a sense of scale of this piece.

Re: need strong joint for long glue ups

#2

Re: need strong joint for long glue ups

John McGaw

>Questions: when is the joint to be made (while the wood is in the square or in the round)? The former I presume. When will the spiral be formed and by what method? Forming by steaming or soaking certainly will be difficult with glued joints and I wouldn't even dream of trying it.

The style of scarf joint you refer to, the one with the locking notches is quite strong but can be difficult to cut with high precision where they will be in plain view. There is also the halved scarf joint which provides improved strength and which some may find easier to cut with the proper jigging. But given modern glues it might be possible to get away with a "plain" scarf, no locking notches or pegs, if they can be made extra long. Of course there is really no rule against using hardware for something like this as long as it is not unsightly -- possibly a glued scarf joint where strong screws are used in place of pegs and then are concealed by plugs before the stock is reduced to its round form?

Any thought given to gluing up the spiral(s) from thin strips? This method would alleviate the bending and joining concerns quite a bit but I don't even want to contemplate what the bending jig and clamping would be like. ;-)

Re: need strong joint for long glue ups

#3

Re: need strong joint for long glue ups

john lucas

>Thanks John I had not thought of pinned scarf joint. He has used butterfly patches all over the pieces where the wood has tried to check. It makes a really interesting pattern. A pinned joint would look quite natural with the rest of the pieces and make cutting the joint really quick.

The pieces are going to be made using the bent lamination method which is why he called me to see if I could help with the glue ups. He thought it might take 2 or 3 people to handle all the clamps and get things lined up. They will be square to begin with.

Re: need strong joint for long glue ups

#4

Re: need strong joint for long glue ups

Don at Central Illinois

>John, make sure you take photos so we can see the final result. Sounds very interesing.

Re: need strong joint for long glue ups

#5

Ellis Walentine

Do it in one piece

Ellis Walentine

>Many years ago (around 1975 or so), there was a sculptor in the Bay Area (whose name may come to me) who used to make these wonderful, lyrical laminated sculptures free form and continuous in space, without using any forms -- just little 'trestles' I guess you'd call them -- in space, with strips of inner tube rubber as his clamps. I'm not envisioning the exact nature of the laminations here, but I think that some kind of staggered strip lamination like this might be the ticket. Then you wouldn't need to do it in sections and have to worry about joining the sections. It is very difficult to cut joints like this, whether scarfs or keyed scarfs or Chinese scarfs like Yeung Chan uses in his continuous-arm Chinese chairs. Even if you get all the adjacent laminated sections perfect, lining everything up properly will likely be very difficult.

Show us a drawing and/or a detail of the piece if you can. Maybe there's something I'm not understanding.

Ellis

Re: need strong joint for long glue ups

#6

Re: need strong joint for long glue ups

Bob Burnet

>What is the radius of the spiraled helix? Perhaps a mandrel made out of 55 gallon drum sections welded end to end and then laminate spiraling thin strips, one at a time, right on top of the mandrel. Cut the drum sections out with a sawzall when you have enough thickness on the helix. Could drill holes in the drum sections to use for clamping. Think of gluing winding narrow stips of paper, one on top of the other, in a helix on a pencil. Just a thought.

Re: need strong joint for long glue ups

#7

Re: Do it in one piece

john lucas

>Ellis I suggested the possibility of doing it in one piece. He's only done very small bent laminations before so he's a little intimidated and so am I. I've done larger ones but nothing like this.

Re: need strong joint for long glue ups

#8

Re: need strong joint for long glue ups

john lucas

>Sorry I should have mentioned the size. I think the radius is around 7 feet and it will approach 26 feet tall which is the height of the ceiling.

Re: need strong joint for long glue ups

#9

Ellis Walentine

Further to the point

Ellis Walentine

>John, I've laminated circular stairways with similar radii. Of course, with large stringers, we needed lots of heavy quick clamps. We built a form -- essentially a circular stud wall @ about 1' on center -- and clamped the laminates to the studs. If you build a 10' high form (wall) , you can laminate 9' high sections and make your 26' helix in three sections. The more I think about it, it shouldn't be too difficult to scarf the top and bottom ends of the laminations after the glue dries but before you remove them from the form. You'd have to make some kind of Skilsaw jig that would allow you to cut accurate mating scarfs (scarves?) on the ends. I'd forget about the idea of having keyed ends on the scarves; that would definitely be a lot of work. But you could make a doweling jig that would allow you to accurately align the parts on the job and either glue them or come up with some nifty knock-down approach -- maybe sex bolts -- that would look fine and be demountable if necessary.

Ellis

Re: need strong joint for long glue ups

#10

Ellis Walentine

Clamping advice *LINK*

Ellis Walentine

>The best way to clamp laminations like this is to have multiple strips of junk wood or masonite on the outside (and in this case, the inside) of your stack to bridge the distance between clamps. In this case, I would definitely recommend just using quick clamps to secure the laminations to the studs of your form and use tourniquet clamps (elastic bands) everywhere in between. Otherwise you'll have to call every woodworker in the county to round up enough clamps.

You need to wax your masonite strips really well (think heavy paste wax) to keep them from becoming permanent parts of the sculpture. Don't underestimate the importance of this, or else your laminations will be very lumpy.

Oh, by the way, I remembered the artist whose work I described earlier. It was Robert Strini. A link to his wood sculpture is below. He was on the back cover of the Woodcraft catalog back in the 70s when they were still in Massachusetts and the whole woodworking renaissance was just underway. It was exhilarating being there.

Cheers,

Ellis


Robert Strini

Re: need strong joint for long glue ups

#11

Re: Clamping advice

john lucas

>Thanks Ellis some good advice. I'll pass it on to Brad. Here is his website to see the work he normally does. This is a large step away from that.

Re: need strong joint for long glue ups

#12

link to Brad Sells  *LINK*

john lucas

>


http://www.bradsells.com

Re: need strong joint for long glue ups

#13

Re: need strong joint for long glue ups

Robin Corell in Atascadero CA

>conecting segments of a compound curve and having it read as a consistant curve is gong to be very dificult. I would take Ellis's advice with one modification. I would build a 12' section of curve to use as a form and then cut the first set of strips 8-10" progressivly shorter in length. for the next section you reposition the previous segment and then all the strips in the next step would all be 8' long. continue repositioning after the epoxy from the previous step has cured and carefully cleaned up and you will eventually end up with a full length helix.

Robin