Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

New shop *LINK*

Posts

New shop *LINK*

#1

New shop *LINK*

mdclor

>Hi to all!

I have been a long time lurker here and an occasional contributor. I really want to thank all the people that have answered my questions and helped me make decisions along the way.

A little over a year ago, we moved from Upstate NY to the Albuquerque area (in preparation for retirement) and built a new house. The pics in the link show my new shop.

We got into the house about 6 months ago, but with work and other life events, I have just finished (90%) the shop. I still need to add a couple hoses to the dust collection system and have a Shark Guard on order for the TS. I also need to build a cabinet for the right side of the SCMS. I have a room, not shown, that will be dedicated to finishing someday. I will also add a 2 foot tall assembly table when time permits.

Thanks for looking and please feel free to ask any questions.

Again, I really appreciate all the knowledge I have gained from the Wood Central brain trust.

Merle


Merle's Shop

Re: New shop *LINK*

#2

Re: New shop

Marv....... Northern California Lake Co.

>Very nice Merle...didja win the lottery?

Marv

Re: New shop *LINK*

#3

Re: New shop

mdclor

>Marv,

I pretty much won the lottery of life-good parents, good siblings, good spouse (and only one), good kids, good jobs. Who could ask for anything more?

Merle

Re: New shop *LINK*

#4

Re: New shop

John K Jordan

>Very nice! And plenty of room for a big lathe.

JKJ

Re: New shop *LINK*

#5

Re: New shop

Rob Stokes in North Vancouver

>Hi Merle - nice shop, but I'm curious why you placed your machine tools so far away form each other? I'd think it would make sense (for example) to place your planer on the other side of the column from your jointer, and to swap the locations of your table saw ans workbench (leaves your saw, jointer and planer in a cluster). And I'm also curious why - with all that space, it looks like can maybe run a 5' stick off the back end of your bandsaw before it hits the dust collector? I'd also snuggle that nice looking router table up to that nice looking outfeed table so you have a table from which you can stage your stock when you're using the router table

Not trying to rain on your parade, but man - you're going to have to put some miles on to move your stock from station to station every time you do a project! Maybe you're planning on making stock-carts, and that would make life a lot easier for moving material around.

Also - please purchase some florescent light bulb condoms (acrylic covers) and some protective wire baskets for those lights. It's no fun WHEN you swing a big stick around and break a bulb.

Nice digs though - I think you're going to have a lot of fun out there.

Rob

Re: New shop *LINK*

#6

JL

Very nice..

JL

>I like everything except the lack of sawdust :). JKJ's right though. You need a lathe somewhere.

Re: New shop *LINK*

#7

Re: New shop

Charlie Self

>Great shop, but as someone remarked, the machines are a bit far apart. That's easy to change when you get a better handle on your work flow. Otherwise, close to perfect.

I got a Grizzly crane a whole bunch of years ago, when I was doing manuals and tool testing. Those things are life savers--not to mention back savers.

Re: New shop *LINK*

#8

Re: New shop

mdclor

>Someday...

Re: New shop *LINK*

#9

Fantastic !

Don Orr

>That's a wonderful shop space you have there Merle. Emphasis on Space ! I hope you have many, many happy days of woodworking in there. Congratulations from another upstate NYer !

Re: New shop *LINK*

#10

Re: New shop

Michael J Bitetti

>That is a nice shop!

I agree about protection for the lights. Thats one of those "to do" things that you will end up doing, right after you finish cleaning up the glass on the floor (DAMHIKT).

My guess about the spacing are: 1.Because its there and 2.Its a great if not only source of a woodworker's excercise after retirement.

One suggestion though. If you are planning on this as a hobby and not a source of income, loose the clock! You'll enjoy it more!

Mike

Re: New shop *LINK*

#11

Re: New shop

Chuck in ND

>Very nice shop, no doubt, looks like a commercial setup. But anyone that knows me knows that I have a bit of an obsession about dust collection and looking at your cyclone I just gotta ask, where is the filter ? I don't see how it breaths with a plastic bag.

Re: New shop *LINK*

#12

Congrats and a question

Grant in Iowa

>Congrats, Merle on the new shop and on the retirement! I like the space a lot.

Do you have any experience in using PVC piping on a previous DC system? That looks like 6" piping, which is what I need to build my ducting from. The conventional wisdom is that is may cause static electricity, but I'd like to hear form the horses mouth if that is an issue.

Specifically, duing the dry winter months, do you experience static zaps as you reach for the blast gates? What blast gates did you find that mate up with the PVC? Any other comments you could make would be appreciated.

Regards and thanks in advance,

Grant in Iowa

Re: New shop *LINK*

#13

Now on ShopTours.org _____*LINK*

Rod Peterson -- Ormond Beach

>Thanks for the new shop, Merle. It's now coded and on ShopTours.org.

Also accessible from the WoodCentral Shop Tours link to the left.

Rod

Re: New shop *LINK*

#14

Beautiful shop! I was wondering,

Eddie J. Pacheco; San Jose, Ca.

>Now with this so called gov't bailout we sort of all own each other's mortages, right? Merle, may I use your shop when in the area? We can all share shops now, woohoo!

All kidding aside nice shop, Merle. If you are near the Placitas area of Albuququre (sp) there's a Centralian that lives there and chimes in sometimes.

Re: New shop *LINK*

#15

Re: Congrats and a question

Larry in NW Ohio

>Grant I stopped at where the woodsucker was built about5 or 6 years ago and saw a few of them in various stages of being built. The bag you see is where the air comes out of, inother words the air goes thru the plunum at the top and goes down into the bag from the outside of the filter to the inside of it and out the top, at least as best as I can remember. He had a nice setup. the last I heard he shut down for some reason. About your PVC, I have an Oneida and ran S&D pvc for mine and would never run anything else. I never had any trouble with static, but that doesn`t mean someone else will not. I ran some of mine along the concrete walls and floor and I think that may ground it some. It sure is so much easier to put up and move, and you will move at sometime. I wouldn`t buy blast gates either, build them, and I put air cylinders on them so they open when I start the machine and close when I shut it off. But good luck with you system. Larry in Ohio

Re: New shop *LINK*

#16

Re: Congrats and a question

Chuck in ND

>Larry, I'm not sure I understand what your saying about the filter. Are you saying the filter is inside the plastic bag, which I'm guessing inside of that is a pleated filter but works in reverse of what most dust collector cartridge filters work ? Are you saying it works like a shop vac cartridge filter ? Then the filtered air shoots out the top straight up ?

Re: New shop *LINK*

#17

Re: New shop - What a beauty !!! I'm jealous.

Ray Carson - Lawrenceville, NJ

>

Re: New shop *LINK*

#18

Re: New shop

mdclor

>Rob,

I do intend to make a shop cart or two. I already have the base for one and will add a riser to it when time/money permit. I mainly use the TS for ripping and cutting sheet goods so I like having the work bench to use to support the infeed side. I tend to go between te MS, jointer and planer when dimensioning stock, so having those 3 tools in close proximity works well for me. I didn't think I had enough clearance around the TS and outfeed table to have the jointer there and since I already had the router table, I didn't want to put the router in the side of the TS. I use the BS for shorter pieces, I think the longest I have ever used it for is 5 feet so I hope it will be okay. I do appreciate your comments, because I can always learn from other perspectives.

Thanks,

Merle

Re: New shop *LINK*

#19

Re: New shop

mdclor

>Charlie,

Thank you! Since I am a hobbiest, time is not that critical. Besides, I might need to add a few more machines some day, so the space between them will diminish. :)

Merle

Re: New shop *LINK*

#20

Re: New shop

mdclor

>The filter exhausts through the top. Any fines that don't drop into the barrel get attached to the outside of the filter or drop to the bottom of the bag. The air goes into the center of the filter and out the top. I hope I have explained this clearly. Unfortunately, Woodsuckers are not being made any longer.

Merle

Re: New shop *LINK*

#21

Re: Congrats and a question

mdclor

>Grant,

It is 6" PVC. I got the blast gates from Lee Valley. They fit both the original white thin wall that I moved from NY and the green that I bought in ABQ. The green PVC is not the right diameter for S&D fittings, so I had to wrap the end or each green tube with duct tape. That was a bit of a pain, but it does make a good seal that way. The cost of PVC has really increased due to the housing boom (now extinct I think) and the cost of petroleum. If I were starting out fresh, I would look at metal duct to see if that might be less expensive. I haven't suffered any static here in NM yet and it is quite dry as you would expect. The humidity today is 17%, but the shop is about 40%. I may regret this once we get into the heating season however. I used homemade wooden blast gates in NY, so it wasn't an issue there. I really haven't used any other type of duct work, so I can't really give any pros or cons versus the other options. When I originally researched the issue, it seemed to me that PVC was the way to go, so I did.

HTH,

Merle

Re: New shop *LINK*

#22

Re: Beautiful shop! I was wondering,

mdclor

>Eddie,

I noticed that you were in NM this week end, so feel free to use the shop any time you are in the neighborhood. As long as we are sharing, please bring some claro walnut from CA. ;-) Jesse Cloud is in Placitas and it is relatively close, but maybe 45-60 minutes away depending on traffic, etc.

Glad your phone recovered.

Merle

Re: New shop *LINK*

#23

Re: Congrats and a question

mdclor

>Larry,

IIRC, Woodsucker got a bad review in one of the mags and closed shortly thereafter, maybe 2004. Tell me more about how the air cylinders work, please. If the PVC is against concrete or any other ground, it will only ground the portion that is touching the ground. Anything not touching the ground is insulated due to the nature of plastic. Does this make sense?

Thanks,

Merle

Re: New shop *LINK*

#24

Yes

mdclor

>

Re: New shop *LINK*

#25

Re: Congrats and a question

Larry in NW Ohio

>As they say a oicture is worth a thousad words. If you would like any other info just ask. Larry in Ohio


img