Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

The Repaired and Finished Granndmother Clock

Posts

The Repaired and Finished Granndmother Clock

#1

The Repaired and Finished Granndmother Clock

George@Colonel's Workshop-Havertown PA

>Good Afternoon Friends,

This clock was inspired by a grandfather clock displayed in the Governor's Mansion in Williamsburg. My best friuend and I made it from scratch in The Colonel's Workshop. We bought the air dried cherry locally, then milled it to rough plans we developed from a photo. I posted progress reports over the passed few months as it took shape. We had it completed, save for the installation of the e waist's back. As I was piston fitting that last piece, I pushed the clock over and caused significant damage to the bonnet's "S" moldings and pediments, breaking one of them off entirely. I also ruined the molding which surrounds the bonnet's lower panels. To complete the job, I also damaged the face's door. That mistake took us another month to repair, working once per week, several hours a day, and more than just a few cold beers.

Very close inspection of the clock now shows our repairs were fully corrected. Charlie took the clock home for pre-finish work. His wife took the attached photo. I will obtain more photos, hopefully of better quality, and we will submit them as a Shop Shot. More details of design, fabrication, and finishing schedule will be forthcoming.

One lesson learned: the longer a project is in the shop, the more certain it will get dinged/damaged before completion. Thanks for your interest. BTW, the movement he used was one he had inherited and kept in a box for 30 years. I suggested we built the clock as a permanent home for the movement. He installed the movement, only to discover the bushings were no good. Another movement is on order from Woodcraft.

George


img

Re: The Repaired and Finished Granndmother Clock

#2

Jason Roehl in Lafayette, IN

Re: The Repaired and Finished Granndmother Clock

Jason Roehl in Lafayette, IN

>Outstanding save, Colonel! That is certainly an heirloom-to-be!

Maybe if I keep drinking beer I'll be half as good as you someday...

Jason

Re: The Repaired and Finished Granndmother Clock

#3

Superb!

doug f, san clemente, ca

>An elegant project to begin with and an extremely successful repair; from the picture it's completely invisible.

This one is destined to become an heirloom in a very short time.

Congratulations!!

Doug

Re: The Repaired and Finished Granndmother Clock

#4

Great Job! Have a cold one on me!

Bob Entwisle in NJ

>Great Job, Colonel!

I knew it would be.

I�ve enjoyed the posts throughout the project. I also had a couple of solemn conciliatory beers when you posted about the unfortunate �accident�!

Great job on the repairs, and a great looking clock!

Bob in NJ, (hoisting a cold Celabratory beer!)

Re: The Repaired and Finished Granndmother Clock

#5

Re: The Repaired and Finished Granndmother Clock

Robert R Clough - Thorncraft

>Excellent, George. Yes, I'd love to see more photos and closeups as well. I have always liked tall case clocks - I have one.

Re: The Repaired and Finished Granndmother Clock

#6

Grandmother would be proud!

Joanne in Pt. Pleasant, PA

>As you and Charlie should be! Excellent job. And it looks great in its new home on that hardwood floor and with the colored wall behind. I'm sure you and Charlie are the only ones who'd notice the repairs. And after a beer or two, you might even miss them. I've enjoyed the progress reports and look forward to the shop shot. Frank and I tipped back a Vitamin Y (that's a Yuengling Lager around here. Or was it a Black and Tan?) in your honor.

Re: The Repaired and Finished Granndmother Clock

#7

JL

Looks great to me!

JL

>

Re: The Repaired and Finished Granndmother Clock

#8

Outstanding work,George!

Stuart Hough

>

Re: The Repaired and Finished Granndmother Clock

#9

Rare

Mark Mandell - Gone Round In Jersey

>and Well Done, all at the same time.

Couldn't resist chiming in on the complements.

mm

Re: The Repaired and Finished Granndmother Clock

#10

All's well that ends

Bill Tindall, E.TN

>Or at least I find that to be true of woodworking projects. Thanks for sharing the clock adventure. You're not a quitter. After the accident most would have been discouraged.

What is the finish?

Re: The Repaired and Finished Granndmother Clock

#11

Re: The Repaired and Finished Granndmother Clock

Don Orr

>Very nice George. Glad to see the finished project. it looks great. You sure saved this from disaster.

Re: The Repaired and Finished Granndmother Clock

#12

It's about time............

Lee Schierer - McKean, PA

>The clock that is, Nice work George. Looks great from where I sit! I'm glad the repairs worked out well. So what is next in your shop?

Lee

Re: The Repaired and Finished Granndmother Clock

#13

Re: Patience

Chuck in ND

>Nice job George, way to stick with it. Patience, isn't that what it's all about ?

Re: The Repaired and Finished Granndmother Clock

#14

Alan Young

If that clock could "tick talk"

Alan Young

>it would have a tale to tell!

Congratulation's George just think of how many extra cold bottle's you had cause to empty :^)

As I live with some of the pieces I've made I come to feel they have a life of their own. Although this will be in someone else's home I'm sure you will have a special relation ship with that clock-even more so because of the "extra" detailed work.

Alan

Re: The Repaired and Finished Granndmother Clock

#15

One Suggestion....

Thomas Skaggs, Foothills of Mount Level

>Good morning Colonel,

Well worth the wait...that clock is a real beauty! But one suggestion I'd like to make is to install some air bags on this clock...just in case! ;-)

Tom

Re: The Repaired and Finished Granndmother Clock

#16

Super Grampa makes a Grandma clock?

HC Sakman

>What is up with the "Grandma" clock business Pasham? Super-duper grampa like yourself should be making "grampa" clocks, right? Perhaps after drinking-clockmaking sessions, it got banged up too much, though nevertheless, you did a complete and satisfying job banging it up as well as making it all fine at the end.

Very nicely done!

One suggestion: You'd have done 2 at once! Twice the beer, twice the banging and "grandma" wouldn't be lonesome without the granpa clock! :-)

Chico...

Re: The Repaired and Finished Granndmother Clock

#17

Re: One Suggestion....

George@Colonel's Workshop-Havertown PA

>Good Morning Tommy,

Charlie will anchor it to the wall just in case. Too bad, in a way. The outside backs are finished to the same schedule, and will be hidden from humanity forever.

George

Re: The Repaired and Finished Granndmother Clock

#18

Next In Shop, Lee

George@Colonel's Workshop-Havertown PA

>Good Morning Lee,

I just completed a bookcase for the Master Bedroom. Yesterday I began two night stand lamps. These will be turned from cherry stock which is segmented and glued up. I drilled the central hole thru the blanks yesterday, and ripped off the four corners of both blanks in preparation for lathe work.

George

Re: The Repaired and Finished Granndmother Clock

#19

Re: All's well that ends

George@Colonel's Workshop-Havertown PA

>Thank you Bill,

Charlie is responsible for the finish. I know he used a stain or oil to darken and blend the color and shade. Also used shellac and poly to top coat. I think he rubbed it out several times. It is as smooth as buttered velvet. I will get his recipe and put it in the Shop Shot narrative.

George

Re: The Repaired and Finished Granndmother Clock

#20

Re: One Suggestion....

Howard Norman

>George, I don't think that Charlie needs to anchor that clock to the wall. I have had a Grandma clock for almost 40 years now and even with the boys growing up it never came close to be tipped over. Just my experience. Of course after posting this I will probable knock it over this afternoon.

Howard

Re: The Repaired and Finished Granndmother Clock

#21

Re: Super Grampa makes a Grandma clock?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Chico,

You are an inspiration. Perhaps the next two of them WILL be Grandfather clocks. Nothing is sadder than a lonely Grandmother. I just need for a couple kids to come up with the bucks, and I will do it for them at cost. That means that they buy the beer also. I want to be renembered as consistent and fair!

George

Re: The Repaired and Finished Granndmother Clock

#22

His Reason to Anchor!...

George@Colonel's Workshop-Havertown PA

>Good Aftgernoon Howard,

One of Charlie's kids liked to play in the first clock he and his uncle made, some 40 years ago. His son used to hide in the base, having gained access thru the glass paneled door. Chains and weights added to the fun and adventure. True, his never fell over. But it is good insurance that it won't tip over with a new grandchikld inside--or Uncle George being around.

George

Re: The Repaired and Finished Granndmother Clock

#23

Lord Chesterfield Ale is my favorite, Joanne

George@Colonel's Workshop-Havertown PA

>

Re: The Repaired and Finished Granndmother Clock

#24

been waiting for this

Tom Sontag - St. Louis

>Colonel,

Ever since that most painful post a while back I have been looking forward to this news item. I thank you for sharing the journey and congratulate you on its superb end. It truly is magnificent.

Every time I attempt something close to this scale, I experience "hitting the wall" (or floor, as you did). Let's just say that your timing for this inspiration was fortuitous.

Tom

Re: The Repaired and Finished Granndmother Clock

#25

Re: The Repaired and Finished Granndmother Clock

Larry in NW Ohio

>Great job Colonel. I`ve been toying around with the idea of making a Grandfather clock for my kids, that would be three of them. They would make quite a hand me down for them. I looked at Murray and they have some very nice one to make. I`d like to put a tubular chime movement in them, but that would get pretty expensive. ThenI thought maybe something like a school clock. Just thinking about what I would like to do for them. Larry in Ohio