Thought it would be fun... (long)
David
>Looking at the pictures of Dominic Greco's tool cabinet motivated me to finally try and tackle one. Now keep in mind that I have this habit of working with what ever wood I have on hand, aka scrap, leftovers, home-milled, etc., because of some fear of turning "good" wood into sawdust and shavings.
So I went out to the barn yesterday and started designing and working. Not wanting to start milling and gluing up pine barn-siding cutoffs, I decided to use a sheet of birch plywood that I picked up cheap from a local HD that went under. Besides, the cabinets I've seen online and in magazines are largely made of plywood.
Figuring that this thing is just a big box, I decided to use dovetails. That was the beginning of my problems. I've seen tear-out before, but this stuff had tear-out, tear-in, curled veneer, blown-out laminations, you name it! I sharpened my router bits, resharpened them (shaved my arms with them), pre-scored, used blue tape, backer boards, everything I could think of to no avail. I even thought about hand cutting the dovetails but somehow plywood and handcut dovetails strikes me as an oxymoron. Anyway, amidst the flying pieces of plywood I catch sight of something black flying off in the opposite direction just as my router dies. After going through the standard checking of plugs and circuit breakers I notice that one of the brushes is hanging out of the router motor. A quick search of the floor yielded the brush cap! Maybe this was a sign? Back to cutting ugly dovetails...
Despite total frustration and disappointment, I glued up the sides and went in for dinner hoping that somehow a liberal application of Titebond would solve everything. This morning, I went back out, shook my head, and proceeded to cut the cabinet apart at the dovetails. Now the cabinet is together, but with mitered corners. Not my favorite way to join something this big (approx.46x32x11) but I feared that even trying to put in a spline in the joints would cause the plywood to do something less than attractive. Next, applied some trim cut from some barn siding to the edges. While the glue dried, I turned to making holders for some chisels and Japanese saws from leftover oak shelving until dinner time.
Well, now it seems like fun but yesterday...
Sorry for the length. If it turns out ok, I'll send some pictures. Thanks for listening



