Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Need motor wiring help

Posts

Need motor wiring help

#1

Need motor wiring help

Larry in NW Ohio

>I`ve been away from wiring to long, of course I really wasn`t very good at it anyway. I bought a reverseing drum switch for my OLD Craftsman drill press, it`s one of the last ones that were made in the U.S.A. and it`s a pretty good one. But I never liked not having a reverse on it. I wonder if someone can rear the diagrams and tell me hoe to do it. The motor is a capacitor start. I know the answer is right in front of me, but I just can`t see it. Thank You Larry in Ohio


img

Re: Need motor wiring help

#2

Re: Need motor wiring help

Dan Donaldson

>From the looks of it, it appears that you just hook the leads on the switch to the corresponding lead on the motor with no jumpers.

Re: Need motor wiring help

#3

Re: Need motor wiring help

Keith Newton, LR, Arkansas------WebKitFormBoundary

>The 3 & 4 are the ones which get reversed in the switch. It is hard to tell you exactly without seeing more of this switch, but it looks to me that 3 & 4 would go on one side of the switch, and the pairs 1&2, and 5&6 would go on the other.

When the switch is in one position, the lines are = in the other, they X.

I assume this is separate from the start switch. I hope this helps.