Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Entertainment Center / Console Unit

Posts

Entertainment Center / Console Unit

#1

Entertainment Center / Console Unit

Marc

>I just finished this a couple of weeks ago.

It is solid curly maple for the main unit, hard maple for the drawer sides, and bubinga slab with natural edge for the top. The handles and hinges are also bubinga. The only ply is the back panels.

The front is gently curved to match the bubinga slab profile. The drawers are sized to hold DVDs/CDs.

For the maple, I finished it with transtint dye (50/50 dark vintage maple and medium brown). Sanded that back to leave the curls, then finished with BLO/tung and finally wax. The bubinga is straight BLO/tung, and the top has a top coat of poly for durability.


img

Re: Entertainment Center / Console Unit

#2

Re: Entertainment Center / Console Unit

Marc

>This hopefully shows the curved front.


img

Re: Entertainment Center / Console Unit

#3

Re: Entertainment Center / Console Unit

Marc

>The drawers - dovetailed, but I cheated and used the leigh jig


img

Re: Entertainment Center / Console Unit

#4

Re: Entertainment Center / Console Unit

Marc

>Drawer pull close-up


img

Re: Entertainment Center / Console Unit

#5

Re: Entertainment Center / Console Unit

Marc

>Hinge - these were fun to make. I did purchase a hingecrafter for this.


img

Re: Entertainment Center / Console Unit

#6

Re: Entertainment Center / Console Unit

Marc

>Another hinge close-up and a little of the curly maple grain.


img

Re: Entertainment Center / Console Unit

#7

Re: Entertainment Center / Console Unit

Marc

>Finally the back. The panels on each side just fit in dados and lift out for easy access. Behind the top drawer there is a compartment with a rear access panel. This holds the power strip and all wiring between the audio and video components to keep the wires out of the way. I really wanted to do this, and I'm happy I did, as it really helps with wire clutter :)


img

Re: Entertainment Center / Console Unit

#8

Re: Entertainment Center / Console Unit

Ray Binnicker

>Hey Marc

For many years I've heard the term; "Master Woodworker". I never really knew what one had to do to become one. From looking at all your pics and the pics of the shop and workbench, I now know what it means. I know you must be busting with pride; I'm proud to be able to look at it all!

Don't lurk any more. There are those of us here that need your input.

Ray Binnicker

Re: Entertainment Center / Console Unit

#9

Nice work, great detailing

Clint Searl, at the base of Haycock Mtn

>

Re: Entertainment Center / Console Unit

#10

Re: Entertainment Center / Console Unit

Fred Davis

>Marc,

That cabinet exhibits exceptionally good skills at design and craftsmanship.

Really gives one a pictorial on the possibilities of woodworking.

FredD

Re: Entertainment Center / Console Unit

#11

Re: Entertainment Center / Console Unit

Marc

>Hi Ray,

Thank You so much for the compliments! However, I am merely a weekend warrior, and have many accidental toothpicks to prove it.

The entertainment center is by far my best piece I've done thus far, IMO. It is the one that I am most proud of - I've covered most of my mistakes well in this one...

Thanks for looking,

Marc

Re: Entertainment Center / Console Unit

#12

Re: Entertainment Center / Console Unit

Larry in NW Ohio

>Marc That absolutly a beautiful masterpiece. I wish I needed one, I1d like to try something like it,but I bet I can make more toothpics than you before I get half way through it. Larry in Ohio

Re: Entertainment Center / Console Unit

#13

Really nice!

Tony - Memphis

>