Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Stearated Sandpaper *LINK*

Posts

Stearated Sandpaper *LINK*

#1

Stearated Sandpaper *LINK*

David

>Hi,

I been doin some reading on finishes and some that write the books say don't use a stearated sandpaper-apparently coated with a chemical that inhibits clogging. I went to the Norton website, and from what I gather, all there sandpaper is stearated when you look at the "3X" type sold at Woodcraft.

So, will the stearated paper sabotage my (water based?) finishes? or am I worried about nothing (has happened to me a lot, it's an affliction.)

The link below has the website info on it.

Thanks, David


http://www.nortonconsumer.com/Data/Element/Node/ProductLine/product_line_edit.asp?ele_ch_id=L0000000000000002553

Re: Stearated Sandpaper *LINK*

#2

Re: Stearated Sandpaper

David Barnett - SW Florida

>Stearated sandpaper may leave cloudy residues which may appear dirty and uneven, although I like to use stearated 320 when sanding in an oil finish slurry.

Re: Stearated Sandpaper *LINK*

#3

Re: Stearated Sandpaper

David

>So, given that it doesn't say on the actual pkg that it is stearated, where does one find non-stearated sandpaper, what brand, etc?

Re: Stearated Sandpaper *LINK*

#4

Ellis Walentine

Stearated paper

Ellis Walentine

>...is almost always variegated in color, usually a marbled blue-gray color. The classic alternatives are garnet paper and aluminum oxide paper, but there are some recent, higher-tech products, including a mesh-screen abrasive (Abralox?) that is getting good reviews from turners and others. Somebody here or on the turning board will surely tell you the name and a source of supply.

I have not noticed problems caused by stearated paper in lacquer and varnish finishes, and I can't recall any with waterborne coatings, although I can't recall specific instances.

Ellis Walentine

Re: Stearated Sandpaper *LINK*

#5

Re: Stearated paper

Fred Davis

>Ellis ,

I used Zinc Stearate loaded paper for about three years and I intially was sold on the non loading aspect of it.

I have since decided that advantage was barely detectable and the price negated any slight advantage over Aluminum Oxide paper.

Since I use Garnet to sand sealer , I havn't had any Fre-mite paper in the shop for a long time.

FredD