New Deck
Larry in NW Ohio
>We`re going to put up a new patio, and I would like your opinions of the various composites, such as Trex,timbertek and others. The good bad and ugly about them. Thank You Larry in Ohio
Knowledge You Can Build On — Est. 1998
New Deck
Larry in NW Ohio
>We`re going to put up a new patio, and I would like your opinions of the various composites, such as Trex,timbertek and others. The good bad and ugly about them. Thank You Larry in Ohio
Re: New Deck
Howard Norman
>I don't really care for any of the composites. I used Ipe for a deck that I built three years ago. So far I am very happy. You have to predrill for the SS screws.
Re: New Deck
Richard Jones
>Look at a new product from Norandex, hidden system, no gap between the pieces, comes a full 6" wide. Fairly pricey (about $5.20/sf here), but for sure it is zero maintenance. Also great for a screened porch floor............
Rich
Re: New Deck
Lee Schierer - McKean, PA
>We redid our front deck about 3 years ago and looked at teh various options, including Ipe. We discounted Ipe because it weathers to a gray color and also cracks over time. We were also not certain about its origin and depletion of rain forest issues. Our primary concern was color and appearance. Trex was rough looking. We determined that the Veranda composite sold by HD was the best choice for us. They also could order fascia boards of various widhts to act as skirting for the treated lumber frame.
Our deck is on the north and west side of our house so it tends to get some algae growth each year, but so far it has cleaned up with soap and water. (The wood had the same problem, but didn't clean up as easy). We also get considerable snow accumulations. I shovel the deck with an aluminum snow shovel and it has not show significant damage after 2 winters. We did note that the decking was not as slippery as the wood had been during periods of frost and freezing weather which was a big plus.
I used the Tiger Claw hidden fastener system and had some difficulty making it work on long spans, but it has held up well and looks great.
Lee
Trex in W Tx
Wayne Carson "TX"
>When I used it for my pool deck looked reaqlly great and still does but gets very hot in the summer have to splash water on it to cool it off before walking on it. "But it stands up to 9 Grandsons very well"
Pre-drill holes and use stainless steel screws.
Re: Trex in W Tx
Chuck in ND
>This is a Trex deck I put up for a friend atleast 5 years ago, he still talks about how happy he is with it.
Re: New Deck *LINK*
Steve Rayboy...Brooklyn
>Hi Larry,
I'm a deck builder here in Brooklyn. Although I've never built a deck out of composites or vinyls, I've read some very negative things on my deck forum about some of them...Trex in particular. You should check out that forum as part of your research. google deck forum gardenweb.
All of my decks are Ipe...beautiful and durable. A bit more expensive than composites, but worth every penny. As a woodworker, you should have no problems installing it. If you want to see some of my projects, check out my link below. I hope it's ok to post my site.
steve
urban exteriors
Re: New Deck
Dan Donaldson
>Beautiful work Steve. Posting links to your site is fine as long as it is in response to a question or contributes to the discussion. It is just commercial postings of websites that is not allowed in fairness to the paid advertisers that help keep the site running.
Re: New Deck
Rick Jackson,TN
>Hi Larry, went up to build a deck on the back of the youngest son's house last year and used composites and once I got the hang of carrying a 20' board that bends when you lift it I loved the stuff. Machined well, no spliters to deal with, and was a good opportunity for my son to learn a little patience while pre-drilling the screw holes :) and really the pre-drilling just isn't that big a deal once you see the finished product. No one has mentioned it but the railing system you can get of composite is easy to install and looks fantastic. Good luch with whatever you use. Rick
Re: New Deck
Chuck in ND
>Actually there is a special screw you can use on Trex and competetive composites that does not require predrilling and it pulls the hump around the screw back down flush with the decking. When Trex first came out and people predrilled and used a coated decking screw you would have to go back and hammer down the hump around the sunkin screw head, not anymore. The screws for composites are self drilling and the last inch towards the head of the screw is reverse machine thread.