Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Marking lines on dark woods...

Posts

Marking lines on dark woods...

#1

JL

Marking lines on dark woods...

JL

>I'm working with some walnut now.

I've used colored pencils (and normal pencils) on a variety of woods. I typically use an artist's pencil (red or blue) on green wood as the normal pencils don't mark the green wood very well. I was thinking about dropping by an art store and picking up some "white" pencils or something similar.

What do ya'll use? Graphite, red and blue are a bit hard to distinguish on walnut :).

Re: Marking lines on dark woods...

#2

Re: Marking lines on dark woods...

Thomas Skaggs, Foothills of Mount Level

>I use white or yellow colored pencils. Tom

Re: Marking lines on dark woods...

#3

Re: Marking lines on dark woods...

Dan Donaldson

>Try a gel pen. They show up pretty well on Walnut. There was a thread on this a long time ago with the exact model.

Re: Marking lines on dark woods...

#4

Re: Marking lines on dark woods...

Lee Schierer - McKean, PA

>White out the area with chalk and then make your mark with a normal pencil. The chalk wipes off pretty easily and makes the pencil mark stand out.

lee

Re: Marking lines on dark woods...

#5

Re: Marking lines on dark woods...

Dave Bair, Eaton Rapids, MI

>Scribe the line or use painter's tape and a regular pencil.

Re: Marking lines on dark woods...

#6

Re: Marking lines on dark woods...

Robin Corell in Atascadero CA

>I use a marking knife rather than a pencil. ocasionaly on walnut it is difficult to see the scribe line so I will go over the line with a piece of chalk and then wipe across the line. the key it to wipe the excess and leave it only in the line which gives the acurace of a scribe line and the visability of a drawn line.

Robin

Re: Marking lines on dark woods...

#7

Blue pencil or ink on walnut works well.

John Pappas

>

Re: Marking lines on dark woods...

#8

JL

Re: Haven't used a gel pen...

JL

>does the ink diffuse into the wood or stay on the surface?

Re: Marking lines on dark woods...

#9

JL

Re: Michaels sells "white" charcoal..

JL

>I will be by one on Thursday, so I'll pick up a couple.

Re: Marking lines on dark woods...

#10

JL

Re: Hmmm - maybe I'll buy some chalk also. Thx

JL

>

Re: Marking lines on dark woods...

#11

Gel pens a clear winner

Bill Tindall, E.TN

>I nver use a pencil any more.

What ever is in gel black ink, it reflects light and shows up clearly on walnut.

The trick is to pick a pen that does not wick into the lumber. The Pilot -500 pens are "best" except they seem to plug up after some usage, or at lest the ones I bought 3 years ago did.

The thing to do is to go to the local office supply store with a piece of poplar. Select every 0.3mm and 0.5mm gel pen on the rack and make a line on the poplar by moving the pen slowly so as to reveal wicking. I recently got some 0.3 mm which make a mark only 0.012" wide. They wick slightly but not at all if the pen is moved fairly quick across the lumber. They were wonderful for marking the 75 dovetails I have recently cut.

BTW some magazine gave me $75 for this idea.

Re: Marking lines on dark woods...

#13

JL

Re: OK, I'll add that to the list...

JL

>Good thing that it's a sales tax holiday for school supplies :).