Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

shipping furniture

Posts

shipping furniture

#1

shipping furniture

David W

>I'd appreciate any ideas on the best way to ship the bench in the photo from Indianapolis to California. It's not very heavy and I wouldn't want a lot of weight to be put on top. Should I build a box or a frame to go around it?


img

Re: shipping furniture

#2

Re: shipping furniture

Lee Schierer - McKean, PA

>For protection, I would recommend a complete box with a shipping skid under it so it can be handled by a fork truck. And be sure to fasten the item(s) to the crate as gravity sometimes does not exist inside a freight truck. Make the box from plywood with 2 x 2 corner pieces. Assemble it with screws so the receiver can get it apart. It should also be strong enough to stand having something placed on top of it, even if you mark the box as "no top loading". There are usually two options for freight delivery on the other end, pick up at the local terminal or tail gate delivery. They sometimes charge extra for lift gate service.

I shipped a dresser from PA to AZ a few years ago and it arrived in god shape, no damage. The cost was about $100-150 if I recall correctly, your mileage may vary!

Lee

Re: shipping furniture

#3

Re: shipping furniture

steve mackay

>Wooden crates WITH lots of dunnage and wraping. The most reputable freight outfit in your area. And if I had made them I'd crate them SEPERATLY. All the eggs in one basket blah, blah, blah. And insured for more than you think they're worth. Good luck !

Re: shipping furniture

#4

Re: shipping furniture costly

Steven Pollack in Chicago

>Shipping a pallet of furniture has gone up in price considerably in the last 3-4 months. $200-$250 from Chicago to the coasts and $150 to the middle of the country.

Steve

Re: shipping furniture

#5

Re: shipping furniture

Dick Coers

>Your biggest concern should be getting support around the legs to keep them from being pushed in if bumped or dropped. You might consider taking a sheet of 1/4" plywood and running a screw up into the bottom of each leg. Put that assembly into a box and add packing. Then place that box inside another box, preferably OSB, and stuff with bead/rigid insulation between the boxes. I've seen way too many boxes get "little" bumps with a fork lift. The forks end up about an 1" or 2 into the box if I am lucky. Another great thing I have seen on really valuable loads that come into work is that they have cardboard pyramids attached to the top of the box. It's supposed to keep the shipper from stacking other items on top. Hope you were asking about packing, just had the thought that you might be asking about shippers. If you can keep the weight down, I would ship with DHL.

Re: shipping furniture

#6

how I crate

Robin Corell in Atascadero CA

>Here is a pic of a a jewelrey case I shipped to Hawaii. The sides are 3/16" door skin with a 2" strip of 3/4" ply glued around the edge of each side. it is very flexable and flimsy until it is screwed together, then it is rock solid yet light. I lne the entire crate with 1" polystyrene. In places where I am concerned about the poly styrene abrading the finish I pad with a layer of tyvec. The pink arrow is idicating where to lift the chest to remove it from the crate. I also circle the screws and write how many need to be removed to uncrate.

When I shipped this the best price I could find was with the US post office. The real ironic thing is that for shipping to Hawaii the post office has an arangement with Fed Ex so it ended up making the trip in 2 days for $232 and 3K worth of insurance.

I have been using this method of crating abot 20 years with excelent results.

Robin


img

Re: shipping furniture

#7

Were you a GI ? . . .

steve mackay

>Thats a true "combat" pack after my own heart ! Toss THAT out at thirty thousand feet and everything'd be okee-dokee.

Re: shipping furniture

#8

Re: Were you a GI ? . . .

Robin Corell in Atascadero CA

>Never been in the armed service. I guess some of us just have a natural knack for over preparing. I did see some crates that came from a mill surplus and they used clear pine and AC ply. Much nicer materials than some use in projects.

Robin